Holley/Flowtech Introduces Upright Headers
Truck pullers, mud boggers, and demolition derby drivers know that there’s one major problem with regular exhaust systems: They sit low to the ground.
Tech
Installing New Axles on Your Late Model Charger or Challenger
If you want to build up a true fire-breathing monster of a late model Charger or Challenger, you’re going to have to install new axles.
Mark Williams’ Brute Strength Rear End – Part 4
In our past segments, we delved into Mark Williams Enterprise’s extreme duty street-strip iron case 12 bolt.
Mark Williams’ Brute Strength Rear End – Part 3
This time around, we’ll look at the differential. And the truth is, a 35-spline streetable 12 bolt isn’t possible without this piece from the folks at Detroit Locker.
Mark Williams’ Brute Strength Rear End – Part 2
Last issue, we began our look at Mark Williams’ custom brute strength 12 bolt rear end assembly.
Installing a Rear Sway Bar In Your Ford
A new sway bar in the rear of your Ford, whether it’s a Mustang, Galaxie, or other Ford product, will improve how it handles in corners.
How to Properly Adjust Your Tires’ PSI
One of the keys to maintaining healthy tires is having the correct tire pressure in all four tires.
How to Flush your Radiator
Flushing your radiator is critically important to the health of your engine. Bassem shows us how to do it!
Selecting and Installing the Right Front Sway Bar for Your Ford Racer
We take a look at how to improve the handling of your Ford, old or new, with a new sway bar.
How to Set Up an MSD Distributor Part IV
This time around, we’ll zoom in on their top of the heap front mount belt drive setup.