not sure what to do

Old 12-02-2011, 09:17 AM
  #1  
rreistino
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: May 2011
Posts: 3
Default not sure what to do

ok I was freshening up my 468 from a car i just bought you know rings and bearings so i thought i would throw in a new set of scat I beam rods when balancing everything we find that all my pistons are junk and my block is junk because the bores are not square with the crank anyways heres what i have now got a fresh block a set of srp 13:1 pistons and this set of scat I beam rods dart pro 1 320cc heads and a .714 lift roller cam do yall think these rods will survive in this engine I was going to send the rods back and exchange them for H beam but the shop had started balancing the rods so im kinda stuck with them any thoughts would be helpfull.
rreistino is offline  
Old 12-02-2011, 11:41 AM
  #2  
cncmotorsports
Senior Member
MASTER BUILDER
 
Join Date: Apr 2003
Location: Brookings South Dakota
Posts: 244
Default

What was the part number on your Scat rods ?

2-ICR6135 (Rated to 700 horsepower)
2-ICR6135-7/16 (Rated to 800 horsepower)
cncmotorsports is offline  
Old 12-02-2011, 12:49 PM
  #3  
rreistino
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: May 2011
Posts: 3
Default

the number i have is sca-26135 with 7/16 cap screws
rreistino is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service