??carb for small block chev. 360??

Old 03-13-2010, 07:38 AM
  #1  
Mike84camaro
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2010
Posts: 3
Default ??carb for small block chev. 360??

I am getting ready to get my engine back from machine shop,.060 350 11.10 compr. small block, solid roller cam. Its going in a street/strip car...My carb. I have now is the 4779- 750... My question is , is it worth the money for me to buy an HP750, cam specs.
@.050 Int. dur. 246 Exh. dur. 253
Int. lift .585 Exh. lift .600
I never have owned a good carb. do they make that much of a difference. I know I left out alot of other info, Just trying to compair the two carbs... Thanks guys for any help
Mike84camaro is offline  
Old 03-13-2010, 09:23 PM
  #2  
dragonmaster093
Senior Member
RACING JUNKIE
 
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,735
Default

i have simular engine and all i had at time was 600 and its way to small have checked around and everyone says hp 750 is what i need so i thought id pass it on to you
dragonmaster093 is offline  
Old 03-14-2010, 12:39 PM
  #3  
JEFF69Z28
Senior Member
DYNO OPERATOR
 
Join Date: Apr 2008
Posts: 496
Default

CALL PRO SYSTEMS OR AED THEY WILL SET YOU UP WITH EXACTLY WHAT YOU NEED.
JEFF69Z28 is offline  
Old 03-14-2010, 01:25 PM
  #4  
spib
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
Default

Originally Posted by JEFF69Z28
CALL PRO SYSTEMS OR AED THEY WILL SET YOU UP WITH EXACTLY WHAT YOU NEED.
I got a new pro systems 4150 for my new motor, have heard good things abought them, will fire new motor on dyno april 14th
spib is offline  
Old 03-14-2010, 06:56 PM
  #5  
Mike84camaro
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2010
Posts: 3
Default

I will look up pro-systems on google,Hay guys, Thanks so far for the help
Mike84camaro is offline  
Old 03-15-2010, 03:17 AM
  #6  
JEFF69Z28
Senior Member
DYNO OPERATOR
 
Join Date: Apr 2008
Posts: 496
Default

PRO SYSTEMS YOU WONT BE DISSAPOINTED!
JEFF69Z28 is offline  
Old 03-15-2010, 03:36 PM
  #7  
Mike84camaro
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2010
Posts: 3
Default

I contacted Pro Systems, They sent me back an email explaining what they could build for me and what it would cost... I am VERY impressed, and the cost is very resonable... Hay THANKS you guys looks like I found me a carburetor...
Mike84camaro is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service