Turbo 350 trans,forward press in park reverse,123gears?

Old 09-05-2009, 02:49 PM
  #1  
speedracer04
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2008
Posts: 2
Default Turbo 350 trans,forward press in park reverse,123gears?

I just put a new converter in and replaced the shift shaft seal, to remove the seal i took out the shift linkage in the trans. My problem now is when i start the car it wants to move forward in Park, reverse, neutral, and natrually in all forward gears!! Could i have installed the shift linkage incorrectly. any help would be great, Thanks. :?:
speedracer04 is offline  
Old 09-05-2009, 04:56 PM
  #2  
fla1976
Senior Member
RACING JUNKIE
 
fla1976's Avatar
 
Join Date: Aug 2007
Posts: 1,535
Default Linkage

Sounds like the shift linkage needs adjustment.
fla1976 is offline  
Old 09-06-2009, 05:40 AM
  #3  
sommersracing
Member
MASTER JOURNEYMAN
 
Join Date: Oct 2004
Location: Hudson FL
Posts: 43
Default

Sounds like the Manual Valve is not hooked up.
sommersracing is offline  
Old 10-02-2009, 02:19 PM
  #4  
Robstclair
Junior Member
APPRENTICE
 
Join Date: Mar 2006
Posts: 11
Default

X2
If you drop the pan you will probably find the s link from the manual valve to the rooster comb (detent lever) not in place.
Rob
Robstclair is offline  
Old 10-02-2009, 04:48 PM
  #5  
kwkracing
Senior Member
RACING JUNKIE
 
Join Date: Dec 2004
Location: austin texas
Posts: 729
Default

Yes sounds like the clip from the manual linkage to the valve fell off, shaped like a S.

kwkracing is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -