Bumper Mounting Help

Old 06-24-2007, 10:19 PM
  #1  
nascarlatemod06
Member
JOURNEYMAN
Thread Starter
 
Join Date: Jan 2007
Posts: 31
Default Bumper Mounting Help

I got some bumpers for my street stock... On the front somebody welded a bumper to the plate where you bolt on thee correct bumper. I want that one off so I can put the correct one on.... What can I use to slice through this sloppy weld? The Below pic is the sloppy weld to the mounting plate



On the Rear, there is just the bars left off the previous bumper... I got the drivers side one off but the very end of the frame is knocked up a slight bit so the screw is up behind the body kind of... Can I heat the crap out of it with a torch to soften the metal and try to bring it back down to level??? Or should I just put it on a frame machine and have it straightened? Or is there any other options??? In the pics below is where the rear bumper bolts up.


nascarlatemod06 is offline  
Old 06-25-2007, 04:20 PM
  #2  
etbird
Senior Member
MASTER BUILDER
 
Join Date: Oct 2006
Location: Georgia
Posts: 140
Default

Sawzall metal cuttin blade with cutting oil.
etbird is offline  
Old 09-13-2007, 08:11 PM
  #3  
inou2
Junior Member
SHOW GUEST
 
Join Date: Jan 2005
Location: Tennessee
Posts: 7
Default

Is this a G body? (malibu, regal, etc?)
inou2 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service