Rebuilt 350 Chevy small block (SBC) with a 2-piece rear main seal, freshly assembled and never run since the build. The block was honed and hot tanked and fitted with new cam bearings and brass freeze plugs. The crankshaft has been turned .010/.010, and the connecting rods were rebuilt with new rod bolts. It has flat top pistons with Hastings rings, Clevite main and rod bearings, and a Melling oil pump with a new shaft and pickup. It also includes a Melling hydraulic camshaft (Part #22215) with new lifters and a double roller timing set, all sealed with Fel-Pro gaskets.
The top end features rebuilt 441 cylinder heads with new valves, springs, seals, and completed guide and seat work, along with Summit pushrods and roller tip rocker arms. It is topped with an Edelbrock Performer intake manifold, a new HEI distributor, and new black valve covers, plus a Stant thermostat and new water outlet. The engine is filled with 10W30 oil with zinc additive, has a Wix oil filter installed, and has been fully primed, making it ready for installation.
This is a complete long block setup but has not been fired since the rebuild, and no run video is available. An engine cradle cart and lift plate are included in the purchase. No trades.
