Engine stalls when revving

Old 10-20-2015, 09:12 PM
  #1  
Tbucket23
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: May 2015
Posts: 3
Default Engine stalls when revving

Recently got back my sbf from machine shop , had it stroked to 347
Same time I changed heads, cam, tconverter
Re assembled the components , engine fired immediately broke in the cam
And every time I rev the engine 2500rpm + it bogs down then Stalls

I've replaced wires coil and even the dizzy
I chanced springs to bring timing on earlier
I've changed the fuel pump, I have a regulator and gauge showing its working

I'm still playing with the timing, as I'd like to get smaller bushings for my msd mech advance
I have not got a vac reading on it yet, that's my next step, but I have ensured no leaks

What do I look for next? I'm f*#%king baffled

Here's my build so far
Thanks for the help, appreciated

>>>>>>>>> 23 T Bucket 2000lbs
>>>>>>>>> 1968 Ford 302
>>>>>>>>> Bore .030 stroked 3.4 = 347ci

>>>>>> Probe industries Forged Flat top 2618 aluminum Pistons 10.6:1 (475grams)
>>>>>> Scat Crank 9000 material
>>>>>> Forged Scat 4304 I beam Rods 5.4length with ARP cap screws
>>>>>> Pro Street Dampener & SFI approved 157 tooth flex plate

>>>>>> *4 deg cam advance
>>>>>>> Comp cam # 35-246-3
>>>>>>> Duration at .50 is 230/236
>>>>>>> 110 lobe separation
>>>>>>> .523/.523 lift
>>>>>>> Hydraulic flat tappet

>>>>>>>>> 180cc alum SBF heads 60cc
>>>>>>> 2.02 intake valves
>>>>>>> 1.06 exhaust valve
>>>>>>> Springs Seat pressure: 132 lbs. @ 1.750 inch,
Open Pressure: 293 lbs. @ 1.250 inch
O.D.: 1.430 inch, I.D.: 0.697 inch
Dual valve springs with damper
Approximately .540 inch max lift at recommended installed height
>>>> 7/16 push rods
>>>> 1.6 aluminum roller rockers

>>>>>>>>> x4 duel IDF Webber Carbs,
MSD Pro Billet Dizzy, Mallory Coil
>>>>>>>>>21* Mechanical Timing, ? Total Timing Advance, All timing in at 2500rpm
(X1 light blue spring, X1 light silver spring)
110gph electric fuel pump

>>>>>>>>> Trans 1968 C4, shifts @ xxx Rpm
>>>>>>>>> Stage 2 shift Kit , w/extra clutch & A servo
>>>>>>>>> 10" 2800 -3500 Stall TCS bracket master Converter
>>>>>>>>> Rear End 68 Jag XKE
>>>>>>>>> 3.33 Gears
>>>>>>>>> Limited Slip
>>>>>>>>> Independent Suspension
>>>>> 1 5/8 primary tube w.3.5" collector Sanderson headers with Supertrapp adjustable exhaust
>>>>>>>>> Tires 31x18.5x15 LT Slicks
Tbucket23 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service