Can i run a small blower with 9.6:1 compression?

Old 08-29-2014, 06:32 PM
  #1  
sweet1969
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Dec 1969
Posts: 3
Default Can i run a small blower with 9.6:1 compression?

Can I?

I am not worried about gaining a huge amount of HP but i like the look of a blower.
Here are the specs on my engine:

Power: 430 HP @ 6000 RPM, 430 ft. lbs. of torque @ 4200 RPM
Displacement: 350 CID, 5.7L
Bore x Stroke: 4.00 x 3.48
Compression Ratio: 9.6:1
Recommended Fuel: 92 Octane
Block: Cast Iron, 1 piece rear seal, 4-bolt main caps
Crankshaft: Forged Steel
Connecting Rods: Powdered Metal Steel
Pistons: High Silicone Aluminum
Camshaft: Steel Hydraulic Roller Tappet
Cam Lift: .525 Intake / .525 exhaust
Cam Duration @ .050: 218 deg. Intake / 228 deg. Exhaust
Lobe Separation: 112 Degree
Cylinder Heads: Aluminum, 3/8 screw-in rocker studs
Combustion Chamber: 62cc
Valves: 2.00 Intake/ 1.55 Exhaust
Rocker Arms: Aluminum Roller, 1.6:1 Ratio
Valve Springs: 12551483
Balance: Internal
Maximum GM Recommended RPM: 5800
Ignition Timing: Base 10 degrees BTDC, 32 degrees total
sweet1969 is offline  
Old 08-30-2014, 07:14 AM
  #2  
coloradoguy
Junior Member
SHOW GUEST
 
Join Date: Jun 2004
Posts: 6
Default

Yes, but you have to run very low boost and really good fuel... I've seen one combo similar to yours run about 4 lbs of boost, and they had to run 110 to keep it from detonating... Just keep your timing and boost down, you should be ok....
coloradoguy is offline  
Old 09-13-2014, 06:00 AM
  #3  
davelee
Junior Member
SHOW GUEST
 
Join Date: Nov 2004
Posts: 7
Default

put a thicker head gasket
davelee is offline  
Old 11-06-2014, 07:36 AM
  #4  
hshufelt
Junior Member
SHOW GUEST
 
Join Date: Oct 2014
Posts: 2
Default

yes you can run a blower just dont over drive it and run good fuel and keep the timming down and you will be fine
hshufelt is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service