LS1 compression vs boost

Old 04-12-2014, 06:21 PM
  #1  
RickAbraham
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Apr 2014
Posts: 2
Default LS1 compression vs boost

Hi guys, I'm currently building a 2003 LS1 engine.
I'm running ARP studded bottem end, standard crankshaft, SCAT forged H-Beam rods 6.100"
I'm also going to be running a T04Z turbo with a front mount intercooler.

The 38mm external Tial wastegate I purchased came with 2 pressure springs one at 9psi and the other at 14.4psi.

Before I purchase pistons I have 2 questions, firstly what pistons should I be using forged or hyper with boost ?
Secondly what compression ratio would you recommend I run for 9psi and or 14.4psi.
I guess I need these questions answered before I purchase pistons so I can purchase a set which will lower my CR to what is required.

I will be using 64cc heads also.

Any advice would be helpful.
Cheers Rick

Last edited by RickAbraham; 04-12-2014 at 08:33 PM.
RickAbraham is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service