Okay now ! Let's play 'Read them bearings !'

Old 04-13-2013, 03:52 PM
  #1  
TheYellaBrick
Senior Member
RACING JUNKIE
Thread Starter
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default Okay now ! Let's play 'Read them bearings !'

360 Mopar 6 seasons of racing pavement hillclimb and autocross. Castrol 20/50 - pumpgas 10.5:1 - 6400 max rpm

#1 main




#2 main



#3 main



#4 main



#5 main



Rods



TheYellaBrick is offline  
Old 04-14-2013, 06:38 AM
  #2  
markdunlap
Senior Member
DYNO OPERATOR
 
Join Date: Jan 2004
Location: central Illinois
Posts: 459
Default okay

Main studs, Line hone.

New rod bolts, resize.

Polish crank.

Rebuild oil pump.

Accusump system.

Windage tray, baffles

After 6 years, the bearings did their job.
markdunlap is offline  
Old 04-14-2013, 06:40 AM
  #3  
markdunlap
Senior Member
DYNO OPERATOR
 
Join Date: Jan 2004
Location: central Illinois
Posts: 459
Default Okay.

Wix racing oil filter.
markdunlap is offline  
Old 04-14-2013, 07:10 AM
  #4  
fast75vega
Senior Member
RACING JUNKIE
 
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
Default Re: Okay.

Originally Posted by markdunlap
Wix racing oil filter.
yep... looks like someone's been running them orange oil filters.....lol
fast75vega is offline  
Old 04-14-2013, 08:47 AM
  #5  
TheYellaBrick
Senior Member
RACING JUNKIE
Thread Starter
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

Orange Junk filters for 2 years until our eye opening discussions on here. Wix afterwards.
ARP in rods and block
TheYellaBrick is offline  
Old 04-14-2013, 09:38 AM
  #6  
roadkill2
Senior Member
RACING JUNKIE
 
Join Date: Jan 2012
Posts: 628
Default

Rods a little worse for the wear, and definitely needed a little cleaner lube stuff, but all in all, no windows or puzzles were made . .

And you had fun . . .
roadkill2 is offline  
Old 04-27-2013, 03:11 PM
  #7  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

I can never go 6 years without tearing something up and having to take it apart!! :lol:
Tod74 is offline  
Old 04-27-2013, 08:18 PM
  #8  
TheYellaBrick
Senior Member
RACING JUNKIE
Thread Starter
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

The only oil pan I could get back when I built this bullet, was a Milodon circle track pan with right side pickup. THIS time I shortened the pickup tube so it is centered, added a baffle to encase the pickup and added an extension to the bottom to flood the pick up. Also added a windage tray as they didn't make them for this application way back when.

As built at Milodon..




Floor extension, Nut serts and locktite..the holes are to clear the windage tray studs.



TheYellaBrick is offline  
Old 04-29-2013, 09:43 PM
  #9  
TheYellaBrick
Senior Member
RACING JUNKIE
Thread Starter
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

Bullet is back in the chamber, just awaiting the arrival of my new Flow Kooler water pump to finish buttoning it all up.
TheYellaBrick is offline  
Old 04-29-2013, 09:43 PM
  #10  
TheYellaBrick
Senior Member
RACING JUNKIE
Thread Starter
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

Bullet is back in the chamber, just awaiting the arrival of my new Flow Kooler water pump to finish buttoning it all up.
TheYellaBrick is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service