496 BBC Build Tips

Old 04-06-2013, 06:01 PM
  #1  
DarrellD
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 1969
Posts: 10
Default 496 BBC Build Tips

Looking to build a 496 pump gas street motor and would like to make 600-700HP on the motor. I plan on spraying a 100-200HP shot of NOS. Any good builds that I can lean too?? As in heads, cam, rotating assemblies. I planned on going with eagle forged. I need suggestions on everything. Just want feedback to pick my best option. Thanks
DarrellD is offline  
Old 04-08-2013, 05:10 PM
  #2  
wazup
Senior Member
EXPERT BUILDER
 
Join Date: Dec 2010
Posts: 345
Default

This is one of the most easiest engines to build with any combo, from a 3.8 crank large bore to 4.5 crank small bore. Here's a combo that will get the hp you want 4.25 crank with 4.25 bore 6.385 rod cam 112to114 center around 270to280 dur and 600 to 650 lift and a set of dart heads alum or steel, brodix bb2 you can bolt these heads on right out of the box. The intake can be dart,eldbr,holley,brdx single plane with 850cfm carb. The parts should be port match as for the rest you know what you need to make it run. Remember you get what you pay for. Hope this helps. Good luck on your build one more thing balance the engine!!!!
wazup is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service