e.t looking for 11's

Old 03-21-2013, 10:13 PM
  #1  
hotrod1994
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default e.t looking for 11's

355
gm forged crank
pro comp i beam forged rods
10:1
world products sportsman 2's 200cc runners 2.05 intake 1.6 ex
.562 .584 lift
290 300 adv durration
259 269@ .050
106 lsa
3200-7200 rpm range
victor jr intake
holley 750 dp

th350
3000 stall

4.88 gears
29 tall tire

3700 lbs

7000-7200 max rpm's

looking for high 11's what do ya think and any advise on getting there?
thanks
-logan
hotrod1994 is offline  
Old 03-23-2013, 11:27 AM
  #2  
fast75vega
Senior Member
RACING JUNKIE
 
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
Default

in a small and light car u should be in the mid 11's... but id still up the converter to like 3500-3800ish
fast75vega is offline  
Old 03-23-2013, 12:26 PM
  #3  
bixblk
Senior Member
DYNO OPERATOR
 
bixblk's Avatar
 
Join Date: Dec 2004
Location: Chicagoland area
Posts: 472
Default ET Est

JMO
I think high 11's is a stretch, I had a similar SBC in a 85 Monte Carlo, similar weight, less gear, and its best time was 12.86.
Good Luck
bixblk is offline  
Old 03-23-2013, 12:30 PM
  #4  
bixblk
Senior Member
DYNO OPERATOR
 
bixblk's Avatar
 
Join Date: Dec 2004
Location: Chicagoland area
Posts: 472
Default ET Est

I thought my Monte would have been a good candidate for a small shot of spray 125/150, so one way to get there would be a small plate of spray.
Again JMO
bixblk is offline  
Old 03-23-2013, 12:33 PM
  #5  
fast75vega
Senior Member
RACING JUNKIE
 
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
Default

my bro runs a 355 in his vega with eagle rotating assmby and hogged out edelbrock heads and two speed glide/ 4500 stall... 488 gears ... 32in tire... it ran a best of 10.37 in the 1/4 and low 1.30's 60 foot times
fast75vega is offline  
Old 03-24-2013, 08:16 AM
  #6  
hotrod1994
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default

yeah im thinking i gotta put the car on a diet.....it a street car as well so how would the 3800 stall work on the street?
thanks-logan
hotrod1994 is offline  
Old 03-24-2013, 08:45 AM
  #7  
fast75vega
Senior Member
RACING JUNKIE
 
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
Default

Originally Posted by hotrod1994
yeah im thinking i gotta put the car on a diet.....it a street car as well so how would the 3800 stall work on the street?
thanks-logan
i think you should be more worried about running that 488 gear on the street then a 3800 stall.... lol

i ran a 3800 stall in my street camaro but with 411 gears and a turbo 400 trans
fast75vega is offline  
Old 03-24-2013, 04:51 PM
  #8  
hotrod1994
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default

i love my 4.88's hahaha i was thinking going 4.11 after a while so i could go farther its 12 miles to town and 3000 rpm at 45 mph but i love them
hotrod1994 is offline  
Old 04-01-2013, 08:48 PM
  #9  
hold
Junior Member
SHOW GUEST
 
Join Date: Dec 1969
Posts: 6
Default

i think u might not b there now depending on ur altitude :cry:
hold is offline  
Old 04-02-2013, 06:11 AM
  #10  
roadkill2
Senior Member
RACING JUNKIE
 
Join Date: Jan 2012
Posts: 628
Default

Think you're geared too short . . at least for the quarter mile . .
roadkill2 is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service