member 666

Old 01-15-2013, 11:55 AM
  #1  
arrow76
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 1969
Posts: 14
Default member 666

Watch what he is selling, sold me heads and claimed they were dart and arent and same as the intake i bought from him suppose to be for a 10.2 deck bbc and is for a 9.8 deck bbc, just watch what you buy from him.
arrow76 is offline  
Old 01-15-2013, 05:35 PM
  #2  
TheRabbit
Senior Member
RACING JUNKIE
 
TheRabbit's Avatar
 
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,295
Default Re: member 666

Originally Posted by arrow76
Watch what he is selling, sold me heads and claimed they were dart and arent and same as the intake i bought from him suppose to be for a 10.2 deck bbc and is for a 9.8 deck bbc, just watch what you buy from him.
Bought from an add on RJ? if so please post the add #.

Thanks
TheRabbit is offline  
Old 01-15-2013, 05:51 PM
  #3  
Harbone
Moderator
RACING JUNKIE
 
Harbone's Avatar
 
Join Date: Aug 2007
Posts: 3,996
Default

Is this the ad for the heads?

http://www.racingjunk.com/Heads/2840...-2-380cc-.html
__________________
Chris

As close to "Normal" as I can get...
Harbone is offline  
Old 01-16-2013, 08:11 AM
  #4  
arrow76
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 1969
Posts: 14
Default

add num 2863055
arrow76 is offline  
Old 01-16-2013, 08:13 AM
  #5  
arrow76
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 1969
Posts: 14
Default

and yes that add was for the same heads
arrow76 is offline  
Old 01-16-2013, 12:10 PM
  #6  
Harbone
Moderator
RACING JUNKIE
 
Harbone's Avatar
 
Join Date: Aug 2007
Posts: 3,996
Default

Have you tried to contact him with any response? I am going to send him a message and see what happens.
__________________
Chris

As close to "Normal" as I can get...
Harbone is offline  
Old 01-16-2013, 01:38 PM
  #7  
arrow76
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 1969
Posts: 14
Default

Yes i have and no response, but a lesson learned again. Im not persueing it, heads already at my machine shop try to get set up for my engine and well intake up for sale for a loss.. Not worth my time or efort, just warning others cause see heads still listed and he has other stuff up for sale also.
arrow76 is offline  
Old 01-16-2013, 11:41 PM
  #8  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

I looked at his other ad and he's advertising a 580" short blk as a tall deck, i couldn't see the front of the blk so i couldn't tell if it was, don't know if he ran those heads on it though. Does the manifold fit the heads with a tall deck/10.2 i know they make tall deck manifolds which are different than short deck, others use spacer plates to use a short deck manifold, just asking.
I just built a 482 short deck for someone that had heads off a tall deck blk, i used stacks injection and had to use .080 manifold gaskets for it to line up.

Zip.
zipper06 is offline  
Old 01-17-2013, 06:09 AM
  #9  
arrow76
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Dec 1969
Posts: 14
Default

i bought couple diff thickness intake gaskets and when get heads back from machine shop im gona see how every thing fits and if it doesnt just put my old dart intake back on. Thanks
arrow76 is offline  
Old 01-17-2013, 08:02 AM
  #10  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

Has anyone sent him a message telling him to come on here ?


What I've seen with some of the dart heads, they sell a lot of blems, could it be possible you may have a dart head thats been ported out to a 380 ?
hammertime is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service