bbc heads

Old 12-29-2012, 04:56 AM
  #1  
showbusiness
Member
CRAFTSMAN
Thread Starter
 
Join Date: Nov 2005
Posts: 58
Default bbc heads

Wondering what heads to consider on a 468 for race use only on c16 with a .700 lift solid roller set up, wanting 750 plus hp, RHS 320,AFR,BRODIX,VICTOR etc. :?
showbusiness is offline  
Old 12-29-2012, 09:02 AM
  #2  
wazup
Senior Member
EXPERT BUILDER
 
Join Date: Dec 2010
Posts: 345
Default

I run brodix but i geuss is how much do you want to spend. I think with any of the heads mention you should be able to make 750hp with the wright work done to them. Good luck on you build.

Robert
wazup is offline  
Old 12-29-2012, 09:41 PM
  #3  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Don't know what's best choice but i built a 468" bone stock bottom end except Probe 10.25 pistons, using a good set of BB2 Extra heads fully ported, and a 6.58/6.63 roller, 454R itake and 1050 dom. It's runing today after 2 1/2 yrs. and about 100 passes. It in a 66 Biscyne that runs [email protected] on motor and the car weighs 3700LBS minus driver. It runs [email protected] on 200 shot of nitrous, all with 1 7/8" headers. He fills up the tow vehicle at Shell station and the 10 gal rear tank in the race car with 93 octane and goes to the track. But as i said all heads are similar, but i only know how the BB2E's perform.

Zip.

Car as mentioned, it's also for sale for $18,000,00

zipper06 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service