bearing clearances bbc

Old 09-16-2012, 06:19 AM
  #1  
ejm
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Nov 2007
Location: indiana
Posts: 123
Default bearing clearances bbc

getting ready to put together 454 .040 over forged 4" crank factory rods (stess tested and ballanced) kb hyp 257 pistons 781's with 2.19 int valve bowl work and a .629 lift mech flat tappet wanting to know bearing clearance on mains and rods and endplay and if you could throw out some hp and tq numbers?
ejm is offline  
Old 09-16-2012, 07:50 AM
  #2  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

If the crank measures standard, i almost alway buy .001 over bearing on both rods and mains, giving me .002/.0025 clearance, .022 side clearance.
I hope you put new good ARP bolts in the rods.

Zip.
zipper06 is offline  
Old 09-16-2012, 08:38 AM
  #3  
ejm
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Nov 2007
Location: indiana
Posts: 123
Default

yes they have arp rod bolts
ejm is offline  
Old 09-19-2012, 03:29 PM
  #4  
ejm
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Nov 2007
Location: indiana
Posts: 123
Default

what is the best way to set thrust bearings? have all toqed and loosen rear cap pry back and then forward with crank then torque?
ejm is offline  
Old 09-19-2012, 06:12 PM
  #5  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Originally Posted by ejm
what is the best way to set thrust bearings? have all toqed and loosen rear cap pry back and then forward with crank then torque?
Right on, pry forward last then torque.

Zip.
zipper06 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service