68 camaro steering

Old 08-21-2012, 04:59 PM
  #1  
clwarters
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Oct 2009
Location: greenville nc
Posts: 9
Default 68 camaro steering

68 camaro z28
ineed to replace my steering gear box but i dont know which one. i have replaced upper,lower ball joints, tire rod ends,a-frame bushing, center drag lenght,ect. i thought about a rack system till i read the the headers, large oil pan ect.need to be alterd, but now the gear ratio ? 12:1.is greek to me verse the stock gear box. what do i need whith out alot extra work
thanks, charles
clwarters is offline  
Old 09-09-2012, 12:24 PM
  #2  
BW67CAMARO
Junior Member
SHOW GUEST
 
Join Date: Dec 2007
Posts: 5
Default

Yes, you are correct about having to alter or modify certain components by installing rack and pinion steering. I personnally would just replace your gearbox with another like one, especially if you already have power steering. The only difference between rack and pinion steering and just power steering is the amount of turns you have to turn the steering wheel to make the wheels hit bump stop to bump stop. This can also be achieved by purchasing a power steering gearbox with a closer gear ratio than what you currently have. You wont have to modify anything as it is the exact same on the outside, just configured differently internal. This different ratio in the gearbox will allow you to turn the steering wheel less, but move the wheels on the ground more. Same thing that rack and pinion does! Only without the headache of modifing other parts on your ride. Oh yeah, dont forget the price difference too! :wink:
BW67CAMARO is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service