BEWARE SCAMMERS IN REIDSVILLE NC

Old 08-20-2012, 08:31 AM
  #1  
a2180turbo
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Dec 2009
Posts: 2
Default BEWARE SCAMMERS IN REIDSVILLE NC

Took my car to get some work done to R AND D Race cars in Reidsville NC and they kept my car forever and gave me a outrageous bill that I paid in full. 5 years into this and my car is not finish and the work thats been done looks like shit. Now the refused to finish the work and I had to take matters to a higher level. Beware of these scammers!!!!!!!!!
a2180turbo is offline  
Old 08-20-2012, 08:54 AM
  #2  
Harbone
Moderator
RACING JUNKIE
 
Harbone's Avatar
 
Join Date: Aug 2007
Posts: 3,996
Default

Are they a Racing Junk member??
__________________
Chris

As close to "Normal" as I can get...
Harbone is offline  
Old 08-20-2012, 11:31 AM
  #3  
a2180turbo
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Dec 2009
Posts: 2
Default Re: BEWARE SCAMMERS IN REIDSVILLE NC

Originally Posted by a2180turbo
Took my car to get some work done to R AND D Race cars in Reidsville NC and they kept my car forever and gave me a outrageous bill that I paid in full. 5 years into this and my car is not finish and the work thats been done looks like s. Now the refused to finish the work and I had to take matters to a higher level. Beware of these scammers!!!!!!!!!

yes they are a Racing Junk Member
a2180turbo is offline  
Old 08-20-2012, 11:48 AM
  #4  
Harbone
Moderator
RACING JUNKIE
 
Harbone's Avatar
 
Join Date: Aug 2007
Posts: 3,996
Default

Did you have them put it all in writing before paying them and waiting 5 years?
__________________
Chris

As close to "Normal" as I can get...
Harbone is offline  
Old 08-20-2012, 04:44 PM
  #5  
Scooterz
Senior Member
RACING JUNKIE
 
Join Date: Mar 2006
Location: EUGENE,OR.
Posts: 3,408
Default

Sorry to hear about this. What kind of work was done? What happened to the work they completed... what was done wrong?
Scooterz is offline  
Old 08-30-2012, 08:28 PM
  #6  
bjuice
Administrator
RACING JUNKIE
 
bjuice's Avatar
 
Join Date: Apr 2003
Location: Greenville s.c.
Posts: 3,239
Default

Give us the names etc...or copy and paste member thread...thanks


on a personal Note I swear to GAWD if I ever needed chassis work done again that's considered major I will buy a 220 miller and go at it and screw it up enough until its right..or buy someones else stuff.


Screw these Rip Off Chassis builders prices..I know it takes talent and its work WHEN YOU WORK..Trust me there is a bunch of DOWN time I have whitnessed from many reputable and Non Reputable chassis builders and you are getting charged for...if you can Measure , have a decent mechanical mind and the tools you can do most of your own stuff...

Three golden Rules to Follow:
1- Don't Cut it too short
2- remember its only metal you can grind it off and start over.
3- Be patient

If you have never welded before and no one around to show you..take a 6 week night/weekend welding certificate course at a local tech school you will have enough to go from there....
__________________
Bjuice..

"I'M YOUR HUCKLEBERRY ! "
bjuice is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service