help

Old 06-29-2012, 05:30 PM
  #1  
dragonmaster093
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,735
Default help

ok on my wagon it has a lil 3.8 with the dual jet ( 1/2 a quadra jet) what other 2 barrel vard will bolt up? this thing is a pos on its last leg and dont wanna rebuild it cause to put and aftermarket air cleaner i have to have a hard to find special adapter. any help would be helpful
dragonmaster093 is offline  
Old 06-30-2012, 07:04 AM
  #2  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

I've used the 4412 Holley 500CFM 2bbl in a variety of applications for years. EZ to tune a set up. Standard size aircleaner base and same jets as 4bbl Holleys.
TheYellaBrick is offline  
Old 06-30-2012, 03:12 PM
  #3  
dragonmaster093
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,735
Default

are the bolt paterns the same?
dragonmaster093 is offline  
Old 06-30-2012, 04:14 PM
  #4  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

Sorry, I can't answer that as I do not know. Someone on here will know, tho.
TheYellaBrick is offline  
Old 06-30-2012, 05:41 PM
  #5  
dragonmaster093
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,735
Default

ok thanks DD
dragonmaster093 is offline  
Old 06-30-2012, 07:05 PM
  #6  
fast75vega
Senior Member
RACING JUNKIE
 
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
Default

i know i seen lil imports with 4 cyl motors with 4barrel 600cfm and bigger carbs ....lol they have adapter plates for almost everything now
fast75vega is offline  
Old 06-30-2012, 08:11 PM
  #7  
dragonmaster093
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,735
Default

lol fast but in my opinion 600 cfm 4 barrel would be way too much over kill for a stock 3.8 heck 500 cfm probably too big figure a lil 350 cfm should work but need to know if itll bolt up. can get get a remaned dual jet for like 200 buti would be back to searching for an adapter.
dragonmaster093 is offline  
Old 06-30-2012, 10:13 PM
  #8  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

Check this place out; scroll down the home page and see what they've got within the website;

http://www.carburetion.com/index.htm

More here;

http://www.carburetorsandmore.com/

And adapters here with measurements;

http://www.summitracing.com/search/?...=carb+adapters
TheYellaBrick is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service