engine to trany spacer

Old 04-17-2012, 06:02 PM
  #1  
hydromaticman
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Apr 2012
Posts: 1
Default engine to trany spacer

anyone know where to get a 5/8 inch spacer for chevy? what Im wanting to do is to run a 300mm 4l60e converter in a 700r4 ( md8 ) behind a ls engine. I have a trany ready with a long stator and the converter is hanging out to far. I have it spaced out using some 5/8 in. nuts and the pull up distance is perfect. my plan was to fab. a spacer from some 5/8 cold roll flat stoc. been looking around for a time saver , any ideas would be nice? thanks
hydromaticman is offline  
Old 04-17-2012, 07:03 PM
  #2  
SPEEDNEEDS1
Senior Member
SENIOR BUILDER
 
Join Date: May 2006
Location: Pikeville KY
Posts: 109
Default

Hughes performance makes a 1" spacer for their new lock up pro mod power glide. It is made out of aluminum and they make it in house. I am sure they can cut you one that is 5/8 if you call them....
SPEEDNEEDS1 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service