496 stroker

Old 04-02-2012, 06:51 PM
  #1  
sethz79
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Apr 2012
Posts: 14
Default 496 stroker

I am pretty new to big block chevy's, "always ran small blocks". So here it is. I am having a 427 tall deck/truck block 10.2'' built into a 496 stroker. I have an Eagle rotating assembly, ballanced and all forged with 17cc. pistons, forged. My application is 4x4 offroad use in a chevy truck with 40'' tires, Im looking for big H/P within 2000-5000 RPM. My question is with heads, and what brand. 118cc. chambers give me 10.1 compresion and 124 chambers will be 9.4. I want a gut shot between the two and want aluminum. however the intake runner size has me confused I'm thinking 300-325? With a dual plane intake?

Any thoughts?

Thanks: Seth
sethz79 is offline  
Old 04-04-2012, 06:17 AM
  #2  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default Re: 496 stroker

Originally Posted by sethz79
I am pretty new to big block chevy's, "always ran small blocks". So here it is. I am having a 427 tall deck/truck block 10.2'' built into a 496 stroker. I have an Eagle rotating assembly, ballanced and all forged with 17cc. pistons, forged. My application is 4x4 offroad use in a chevy truck with 40'' tires, Im looking for big H/P within 2000-5000 RPM. My question is with heads, and what brand. 118cc. chambers give me 10.1 compresion and 124 chambers will be 9.4. I want a gut shot between the two and want aluminum. however the intake runner size has me confused I'm thinking 300-325? With a dual plane intake?

Any thoughts?

Thanks: Seth
A dart 320 would be a good choice.
hammertime is offline  
Old 04-04-2012, 07:39 PM
  #3  
cncmotorsports
Senior Member
MASTER BUILDER
 
Join Date: Apr 2003
Location: Brookings South Dakota
Posts: 244
Default

310 Dart, or AFR 305 would be good with the dual Plane intake. Will build incredible torque at lower RPM.
cncmotorsports is offline  
Old 04-06-2012, 06:43 PM
  #4  
sethz79
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Apr 2012
Posts: 14
Default

Thanks guys. That was the way I was leaning, just wanted to make sure I was thinking strait.
sethz79 is offline  
Old 05-25-2012, 06:30 AM
  #5  
Notalent
Member
MASTER JOURNEYMAN
 
Join Date: Dec 2007
Location: Grand Prairie, Texas
Posts: 36
Default

Im with Carl, AFR 305cc CNC heads. I run these on my 496ci stroker in a tame build and they make power!
Notalent is offline  
Old 05-25-2012, 06:45 PM
  #6  
hotrod1994
Senior Member
EXPERT BUILDER
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default

pro comp 320cc's i don't care what every think about them every one i talk to that RUNS them says there good heads for the price and they buy them again JMO
and are you seth meddaugh?

- logan
hotrod1994 is offline  
Old 05-29-2012, 06:30 PM
  #7  
badrad
Member
JOURNEYMAN
 
Join Date: May 2007
Location: San Dog
Posts: 34
Default

IMO AFR 265, Brodix 270 or Dart 270 oval ports would be a good choice. That build sounds like you need lots of TQ in the 2000-5000 range.
badrad is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service