Dart oval port intake vs C454 Edelbrock intake

Old 03-27-2012, 05:44 PM
  #1  
348409
Junior Member
APPRENTICE
Thread Starter
 
Join Date: May 2003
Posts: 20
Default Dart oval port intake vs C454 Edelbrock intake

Current engine is a 557in bbc running pump gas. 11-1 +/= on the compression, 731/714 lift 270ish duration solid roller, Older Dart 310 heads with 2.300 intake valves,Pro systems 1050, crank trigger ign, glide with 3800 stall, back half car with 4.86 gears. Car weighs 3250 with me in it. Current intake is a Oval port intake port matched to the old 781 headed 489. Car runs decent with a best of 9.71/137 with a 1.37 60 on a hot day. Looking to pick it up some to do some 9.60 index racing. Have a C454 intake laying around the shop and was wondering if it would run better with it being a square port intake, Anybody done any this type of testing?
348409 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service