LOOKING FOR SOMEONE THAT IS A NITROUS GURU!!!!

Old 03-09-2012, 09:54 PM
  #1  
fastted
Member
MASTER JOURNEYMAN
Thread Starter
 
Join Date: Nov 2003
Posts: 43
Default LOOKING FOR SOMEONE THAT IS A NITROUS GURU!!!!

Hows it going and thanx for reading! I think Im knowlagable on nitrous but would like some feedback. Its a new motor so I need to figure it out. I have a 706" aluminum motor olds 14 degree heads @ 28 deg timming with 2 stages of foggers. 1st stage is 26/30 jets 6psi fuel and taking out 10 degree 2nd is 28/32 6 psi fuel taking out another 10 degree. havent ran this yet, but that might be my starting point?? Of chorse I will make a 60-330 hit first on 1 stage only then read plugs and see were im at and make adjustments. Once I have that one good I'll do same to the 2nd. Then let them both go. 1st stage will come on as soon as I pull the trigger second is .8 out so I will be on both befor the 60.


Also im running vp c23 thinking about q16???


If anyone has the time to talk that knows what there talking about I would appriciate it! Hope to hear from ya!!
fastted is offline  
Old 04-15-2012, 04:31 PM
  #2  
dw
Junior Member
APPRENTICE
 
Join Date: Apr 2004
Location: Nashville, Tn
Posts: 14
Default

you may already have found someone...but if not here are 2 of the best....
Monte Smith performance- Moulton Alabama
Steve Johnson-Induction Solutions- Florida
dw is offline  
Old 04-16-2012, 04:52 PM
  #3  
TheRabbit
Senior Member
RACING JUNKIE
 
TheRabbit's Avatar
 
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,295
Default

Originally Posted by dw
you may already have found someone...but if not here are 2 of the best....
Monte Smith performance- Moulton Alabama
Steve Johnson-Induction Solutions- Florida
You can get a quick response from either one on Yellow Bullett
TheRabbit is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service