What reg. do I run with carb. and alky???

Old 02-17-2012, 07:24 PM
  #1  
SPEEDNEEDS1
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: May 2006
Location: Pikeville KY
Posts: 109
Default What reg. do I run with carb. and alky???

I have a Ron's 0 1/2 pump, APD alky 1150 dominator. What regulator can I use. I would like to run my fuel inlet in one end of fuel log and bypass fuel through the regulator back to the cell. I know that APD sells that regulator, but what other regulators will work?????
SPEEDNEEDS1 is offline  
Old 02-18-2012, 06:28 AM
  #2  
markdunlap
Senior Member
DYNO OPERATOR
 
Join Date: Jan 2004
Location: central Illinois
Posts: 459
Default What

Holley makes a bypass regulator now based on the original 803 one used with their fuel pumps. It is alcohol compatible and is only about $70.

I think it is 12-803BP.

C&S makes one that looks the same as the Holley that has a holley jet in one end that will allow you to set idle pressure down to 3-4# and then use the main adjuster up to 15# when pump volume builds up at higher RPMs. It works well to keep the stainless steel needle and seats from dripping at idle and really pours in the fuel a WOT.
markdunlap is offline  
Old 02-18-2012, 02:29 PM
  #3  
SPEEDNEEDS1
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: May 2006
Location: Pikeville KY
Posts: 109
Default

thanks, that is the answer I was looking for.....
SPEEDNEEDS1 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service