33 spline-Strange and Mosier

Old 01-10-2012, 11:30 AM
  #1  
rww910
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2010
Posts: 1
Default 33 spline-Strange and Mosier

I bought a new 9" center with a 33 spline spool from Strange. I have 33 spline Mosier axles. Somebody at the track told me that the Mosier and Strange have differences in the 33 spline arrangement that make them non compatible. Is that true?
rww910 is offline  
Old 01-10-2012, 11:59 AM
  #2  
RonOwensRacing
Senior Member
DYNO OPERATOR
 
Join Date: Oct 2004
Location: florence ky
Posts: 498
Default

Some of them have a rounded spline and the others are flat spline i think the moser is flat and the strange is rounded can't remember for sure.
RonOwensRacing is offline  
Old 01-10-2012, 01:49 PM
  #3  
TheRabbit
Senior Member
RACING JUNKIE
 
TheRabbit's Avatar
 
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,295
Default

I've always heard to run same brand axle and spool.
TheRabbit is offline  
Old 01-12-2012, 08:53 AM
  #4  
coolracing
Senior Member
MASTER BUILDER
 
Join Date: Jan 2008
Location: Yooper
Posts: 168
Default

They will fit in one another but there is a different pitch on the splines I just run into that same deal I have 40 spline strange axles and a mosier spool it was little tight goin together. I now have everthing strange, went together like butter. Apparently got to be manufacturer loyal!
coolracing is offline  
Old 01-16-2012, 07:47 PM
  #5  
hammertime
Senior Member
RACING JUNKIE
 
Join Date: May 2003
Location: Coldwater, MI
Posts: 2,998
Default

Yes you have to tell Moser your running strange axles, they can accomdate the change,
hammertime is offline  
Old 02-02-2012, 05:45 AM
  #6  
injectedrat68
Junior Member
APPRENTICE
 
Join Date: May 2003
Location: Broad Brook,CT.
Posts: 23
Default axles &spool

I have a question - Im building a tube chassis 68 camaro,fiberglass nose-doors drunk lid and lexan windows so ,Should i go with 35 or 40 spline on axles. I believe the car should be running somewhere in low 9s to hi 8s(im hoping)lol
injectedrat68 is offline  
Old 02-02-2012, 06:04 AM
  #7  
coolracing
Senior Member
MASTER BUILDER
 
Join Date: Jan 2008
Location: Yooper
Posts: 168
Default Re: axles &spool

Originally Posted by injectedrat68
I have a question - Im building a tube chassis 68 camaro,fiberglass nose-doors drunk lid and lexan windows so ,Should i go with 35 or 40 spline on axles. I believe the car should be running somewhere in low 9s to hi 8s(im hoping)lol
if your willing to spend the extra few bucks on the difference in spools I would go with the 40's. always nice to leave room for serious hp down the road. But 35's would be fine, keep in mind that 40 spline axles just really started coming out a handfull of years ago. IMO
coolracing is offline  
Old 02-02-2012, 06:47 PM
  #8  
injectedrat68
Junior Member
APPRENTICE
 
Join Date: May 2003
Location: Broad Brook,CT.
Posts: 23
Default axles &spool

Ya, thats what i thought. I think if i go any faster ill go with the 40.Anyway this car is more like pro street so the next step would prob. buy a top sportsman. Thank for the reply.
injectedrat68 is offline  
Old 02-11-2012, 10:59 PM
  #9  
olds48
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Location: Montvale, VA
Posts: 1,431
Default

Different companies use different pressure angles on their axles and spools. I know that you already know that,but who knows if they ever decide to change them or not. A quick call to the people that made your spool would be FREE insurance. I'd just call them and then you'll have no worries.
olds48 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service