rpm help

Old 11-26-2011, 08:01 PM
  #1  
hotrod1994
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default rpm help

what kind of rpm's will i turn through the taps with the set up im looking to go with
76 camaro about 3400 lbs with driver
mild sbc with STOCK bottom end mild cam 477/477 lift and268/268 durration
1.94/1.5 heads milled for 9.3:1
th350
3200 stall
4.88 gears (open to suggestions for best results) but looking to stay higher to get off line decent
29x12.5 mt sportsmans

stock bottom end 350 with mild set up just looking for what the rpm's will be at the end of the 1/4 mile im willing to push this thing to the absolute limit but will 4.88's be to much i can get a set cheap

(BUY IT,BUILD IT,BREAK IT, AND REPEAT)
hotrod1994 is offline  
Old 11-26-2011, 08:30 PM
  #2  
spib
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
Default

I had a stock 350 with a 470 lift cam
turbo 350 3600 b&m convertor
4:86 gears went through the finish at 5800
on a 29 tall slick
no I dont think the 4:88 would be to low
I would quess your rpms will be 5700-6300
spib is offline  
Old 11-27-2011, 05:37 PM
  #3  
hotrod1994
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default

what would she run in the 1/4
hotrod1994 is offline  
Old 11-27-2011, 08:15 PM
  #4  
spib
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: EastWenatchee,WA
Posts: 887
Default

Originally Posted by mrbigtrucks
what would she run in the 1/4
my blazer with that combo at 3180 with driver went 12.70's and last time I raced it with that motor the moon was lined up perfect ran 12.38 and a 12.52 that day
spib is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service