350 drag race chevy engine

Old 11-17-2011, 05:06 PM
  #1  
csx8506
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Feb 2008
Posts: 114
Default 350 drag race chevy engine

I am building a 350 bored .060 over 4 bolt main for a 1500# altered. What do ya'll think of this combination. 3.48 crank, Eagle 5.7 H beam rods with L19 bolts, 12.5 to 1 CR, topped by AFR 220 Competition Heads with 65cc chambers, with Comp Cams solid roller cam with 284/292 duration at .050 lift, and 680/660 valve lift and to top it off an Edelbrock TR-1Y tunnel ram with 2-660 Holley's all fired by MSD and exhausted thru Dynatech 2 in primary's with a 3.5 inch collector. Also, the cam is on a 106* LSA.
How much HP and TQ should this combo make, and what rpm will it make max torque and HP? I understand that I will have to spin it to 8000 to 8400rpm to make it all work on the track. Also, what ET's can I expect with this combo with a 1.76 Powerglide and 4.56 rear gears?
csx8506 is offline  
Old 11-17-2011, 07:42 PM
  #2  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

I would guess mid 9's with everything running right on gas.

JMO

Zip.
zipper06 is offline  
Old 11-18-2011, 05:02 AM
  #3  
csx8506
Senior Member
SENIOR BUILDER
Thread Starter
 
Join Date: Feb 2008
Posts: 114
Default

Thanks Zip for your reply. dgh
csx8506 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service