motor plate hitting the head

Old 09-01-2011, 06:12 PM
  #1  
rlolley
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Oct 2008
Posts: 5
Default motor plate hitting the head

Here's my question, has anyone had a problem with the motor plate hitting the head and not allowing the plate to mate flush with block? (obviously driver's side only because of head stagger) The heads are old brodix ('80) and stick out 1/4" past the block. I bought 1/4" water pump spacers to offset the plate at the water pump, but that also includes spacing the plate out 1/4" from the chassis mount and the 2 lower block holes as well. Is this just a really thick older head issue or is this common with some aftermarket aluminum heads?
rlolley is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service