cam grind help

Old 08-27-2011, 05:33 PM
  #1  
hotrod1994
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default cam grind help

ok guys im looking for custom cam grind suggestions for a sbc it has
9.3:1 compression and i want a high lift lift nasty sounding hydrallic flat tappet that will work with my set up

std bore 350
9.3:1 compression would like to run premium 91-93 octane
1.94-1.5 worked iorn heads
torker intake/ but i may upgrade to a knock off of the victor jr
holley 750 (yes it's a little big)
mallory unilite and mallory hyfire 6 ignition

it will have a th 350 behind it with a 3000 stall converter
4.11 gears

im looking for a high lift nasty sounding cam that will work good with my set up and make lots of power through from abot 2,500/3,000-6,000

im open to any help or suggestions

thanks logan
hotrod1994 is offline  
Old 08-30-2011, 08:13 AM
  #2  
doorjammer
Junior Member
APPRENTICE
 
Join Date: Nov 2003
Posts: 19
Default cam

look at comp cam.........thumpr cams
doorjammer is offline  
Old 08-30-2011, 03:49 PM
  #3  
markdunlap
Senior Member
DYNO OPERATOR
 
Join Date: Jan 2004
Location: central Illinois
Posts: 459
Default Cam

Just installed a Mutha Thumper Hydaulic roller in a 377 SBC street/Strip Nova.

It does sound REALLY GOOD at idle. Also has enough vacuum for power booster on brakes.
markdunlap is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service