SBC Engine Lifting "Rings"

Old 08-13-2011, 02:19 PM
  #1  
pasadenajim
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Oct 2009
Posts: 1
Default SBC Engine Lifting "Rings"

Chevrolet installed on some of their V8 engines "lifting rings" held onto the head by 2 bolts. Each had a 3/4 or 1" hole in the vertical part of the "ring" and I believe this was used by the factory during installation of the engine and simply left on the engine instead of taking time to remove. I need 2 of these things and would be grateful to anyone out there willing to be of help in this matter. Jim @ [email protected]
pasadenajim is offline  
Old 08-19-2011, 03:43 PM
  #2  
Scooterz
Senior Member
RACING JUNKIE
 
Join Date: Mar 2006
Location: EUGENE,OR.
Posts: 3,408
Default

Hi Jim,

Had them on last two engines... I remember running some wire-loom through them on one motor. I might still have one that I removed on my last motor in truck. I will check this weekend on my boxes... I might only have 1. How many you need?
Scooterz is offline  
Old 08-21-2011, 11:27 AM
  #3  
kwkracing
Senior Member
RACING JUNKIE
 
Join Date: Dec 2004
Location: austin texas
Posts: 729
Default

what area do you live in?
kwkracing is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service