Crankshaft turning???

Old 07-17-2011, 06:49 AM
  #1  
toofazt4u
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Apr 2006
Posts: 15
Default Crankshaft turning???

Has anyone out there ever heard of turning a crankshaft to clear the throws for clearance???? I have had a engine builder who has taken Me for way too much time and money tell Me that he needs to send My crankshaft to Callis to have it turned down to clear the botton of the pistons....
This builder has had My motor way too long and is and now trying another stall tactic...He said he will flip the bill for the hastle and is sorry...Sound like a scammer????
toofazt4u is offline  
Old 07-17-2011, 08:03 AM
  #2  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

We need a ton more info and history of YOUR deal with him. Any documentation?
TheYellaBrick is offline  
Old 08-21-2011, 11:25 AM
  #3  
kwkracing
Senior Member
RACING JUNKIE
 
Join Date: Dec 2004
Location: austin texas
Posts: 729
Default

if you are building a extreme stroker engine, i could see trying this. If you are building a common cubic inch engine, you have mis matched parts, the wrong rods and or pistons for the stroke of your crank. Before cutting the diameter off a crank you need to make sure the your pistons and rods have a lighter balancing weight than stock
kwkracing is offline  
Old 08-23-2011, 08:27 AM
  #4  
TS1955
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2007
Location: Lost Creek, WV
Posts: 533
Default

Years ago before you could buy matched rotating assemblies I bought a Lunati crank, Childs & Alberts aluminum rods, and Arias pistons for a 9.8 deck BBC. I used a .400 long rod but the counter weights hit the pistons. So I sent the crank back to Lunati and they machined the counter weights down to work with my combo.

TS1955
TS1955 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service