hp estimate and estimated 1/4 et

Old 06-22-2011, 07:27 PM
  #1  
hotrod1994
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default hp estimate and estimated 1/4 et

sbc 350 stock bottom end 10:1 compression with

aluminum angle plug heads
intake Port Volume 210cc
Intake Valve Size 2.02
Exhaust Valve Size 1.60

lunati 60105 cam
Advertised Duration : 284 /292
Duration @ .050 IN/EX : 241 /249
Gross Valve lift IN/EX .525''/.546''
LSA and ICL 110/106
RPM Range: 2500-6600

High Rise Aluminum Intake
single palne 2500 -7500 rpm rang

holley 750

Mallory hy fire 6 and Mallory unilight distridutor with msd blaster coil

th350 stage 2 shift kit 2200 stall 4:10 gears and 29x12.50 m/t sportsman pro
hotrod1994 is offline  
Old 06-22-2011, 09:40 PM
  #2  
bluedawg357
Member
CRAFTSMAN
 
Join Date: Dec 2010
Location: anchorage alaska
Posts: 56
Default

The intake runners seem a little large for a 350. What kind of heads and intake.
bluedawg357 is offline  
Old 06-23-2011, 10:09 AM
  #3  
hotrod1994
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default

heres the heads there some e bay ones

http://cgi.ebay.com/ebaymotors/SBC-3...Q5fAccessories

heres the intake another ebay

http://cgi.ebay.com/ebaymotors/SBC-S...item5adc1d2b38
hotrod1994 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service