502 gm block/4.375 stroke

Old 05-24-2011, 06:15 PM
  #1  
ultimatewarrior1
Junior Member
APPRENTICE
Thread Starter
 
Join Date: May 2007
Location: LAFAYETTE,LA.
Posts: 16
Default 502 gm block/4.375 stroke

is there enough room in a gm 502 block to clearance for a 4.375 stroke w/aluminum rods???
ultimatewarrior1 is offline  
Old 05-25-2011, 07:25 AM
  #2  
cncmotorsports
Senior Member
MASTER BUILDER
 
Join Date: Apr 2003
Location: Brookings South Dakota
Posts: 244
Default

I would not recommend it, your gonna have clearance issues, and camshaft clearance issues.
cncmotorsports is offline  
Old 06-29-2011, 11:31 AM
  #3  
triniemi
Member
JUNIOR BUILDER
 
Join Date: May 2007
Posts: 83
Default

Jason Line builded a Gen VI 557cid, but with steel rods:

http://www.chevyhiperformance.com/te...ild/index.html
triniemi is offline  
Old 06-29-2011, 02:48 PM
  #4  
ultimatewarrior1
Junior Member
APPRENTICE
Thread Starter
 
Join Date: May 2007
Location: LAFAYETTE,LA.
Posts: 16
Default 502 gm block/4.375 stroke

Originally Posted by triniemi
Jason Line builded a Gen VI 557cid, but with steel rods:

http://www.chevyhiperformance.com/te...ild/index.html
thanks for the info....
ultimatewarrior1 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service