carb spacer

Old 04-09-2011, 09:17 PM
  #1  
Moparmike55
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Feb 2010
Posts: 4
Default carb spacer

I am looking for a carb spacer to run on my 360cid crate motor. Just install an Edelbrock air gap 7576 with a 750 Holley. May have to go to a for hood clearance, is 4 hole, 2 hole or wide open the best.
Mike
Moparmike55 is offline  
Old 04-11-2011, 07:11 PM
  #2  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,579
Default

I run a 4 hole spacer on my small block into a indy intake :!: :!:



Mark
mopar1968 is offline  
Old 04-11-2011, 07:24 PM
  #3  
fast75vega
Senior Member
RACING JUNKIE
 
Join Date: Nov 2008
Location: Niagara Falls, NY
Posts: 965
Default

Originally Posted by mopar1968
I run a 4 hole spacer on my small block into a indy intake :!: :!:



Mark
now... why a four hole... s their really a difference? im running a open spacer with a 4 hole on top of that.
fast75vega is offline  
Old 04-11-2011, 07:32 PM
  #4  
cncmotorsports
Senior Member
MASTER BUILDER
 
Join Date: Apr 2003
Location: Brookings South Dakota
Posts: 244
Default

Every engine is different. Some like open spacers, some ported spacers.

Typically we see the 4 hole ported spacers work the best for most applications.

Hamburger makes a nice 1 inch ported spacer.
cncmotorsports is offline  
Old 04-11-2011, 07:39 PM
  #5  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,579
Default

Mine is a ported 4 hole spacer. The bottom side of the holes are larger than the top of the holes.Engine was dynoed with spacer :!:


Mark
mopar1968 is offline  
Old 04-13-2011, 09:17 AM
  #6  
Moparmike55
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Feb 2010
Posts: 4
Default carb spacer

Originally Posted by mopar1968
Mine is a ported 4 hole spacer. The bottom side of the holes are larger than the top of the holes.Engine was dynoed with spacer :!:


Mark
Mark, Did you enlarge the spacer yourself or did it come that way, and who makes it? Thanks,
Mike
Moparmike55 is offline  
Old 04-13-2011, 11:57 AM
  #7  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,579
Default

Here it is if you will look the hole's are tapered, It work's like a champ on my car :!: :!: The guy's that dynoed my engine worked to get me the best from the engine and found this plate work's great :!: :!:

http://www.jegs.com/i/Barry-Grant/13...oductId=743575



Mark
mopar1968 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service