Mike Chapman racing heads

Old 03-31-2011, 09:51 AM
  #1  
camaro96
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Dec 2008
Posts: 2
Default Mike Chapman racing heads

I have a set of Brodix 10x heads for sbc that say Chapman Racing Heads on them. They have a bunch of #'s stamped on the front where the accessories would go. I was curious what these #'s mean and if anyone has any contact information for Mike Chapman? I googled him and found a # but the number I called is no longer any good. I would like to find out a bit more about these heads and if they are any good or not. Thank You
camaro96 is offline  
Old 03-31-2011, 02:38 PM
  #2  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

Can you post the #'s? i have a set of Brodix 10's also with #'s on them, i called Brodix to see what they meant. My are marked RP's FP's, SP's they mean raised intake ports, filed pushrod holes, and spead port exhaust., Mine are fully ported but i don't know by who, but they flow 314 CFM at .600 lift, with 2.150 int valves.

Is this the ph# you have, the site listed below it is a profile of the business. Don't know if he's still in business or not though.

Name: Chapman Racing Heads Inc
Phone: (801) 292-3909
Fax: (801) 292-3701
Address: 2261 South 1560 West

Woods Cross, UT 84087

http://www.manta.com/c/mm2mt6s/chapman-racing-heads

Zip.
zipper06 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service