Best heads for a bbc.

Old 01-11-2011, 10:56 PM
  #1  
Berlinetta79
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Aug 2010
Location: Estonia, Tallinn
Posts: 8
Default Best heads for a bbc.

Hi there

First topic from me and asking for some help.

I have these things:
361959 block from 1979y 454cid, heads 336781 OpenChamber 113.0cc OVAL PORT - Valve size 2.06 intake, 1.72 exhaust, Race Demon 1025 carb, NOS Wet Big Shot , Edelbrock Victor Jr. Single Plane intake, Dedenbear NOC1 nitro controler and MSD electronics all the way( Msd 7 al2 , Msd Blaster coil ,Msd 3 step retard , Msd rpm activated switch). Cant at the moment afford a nice new bb (dart or merlin) block to start making a real killer thing. So, obviously you guys here have the knowledge about bbc, what you think would be the best heads for that combo. Any suggestions on cam and pistons?

Its my first bbc build ever and trying to avoid wrong moves(not to buy items that will not be the best for the engine etc).

So far I have been offered pro-comp heads with a set of dart 308 steel heads with 2.25 int and 1.88 ex valves with isky springs good for .750 lift and a a pair of 074 factory aluminum heads.They are bare heads,set up for 2.19/1.88 valves. Really dont know what would be best. The idea itself is to build a strong engine for drag-racing. Th350 or 400 gb and 4.10 gears. And with the money I have I am making it from item to item. Still will need to figure out what pistons, maybe a stroker kit etc.

Oh and the engine will go on -79 Camaro Berlinetta


So, help?

E.
Berlinetta79 is offline  
Old 01-11-2011, 11:42 PM
  #2  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

The best heads that you listed are the Dart 308's, although they are heavy, they flow a little over 360 CFM as cast.

JMO

Zip.
zipper06 is offline  
Old 01-12-2011, 12:10 AM
  #3  
cepx111
Senior Member
RACING JUNKIE
 
Join Date: May 2006
Posts: 2,044
Default

Hands down on the heads Zipper recommeded.

On my GM 454 I went with a 1/4 stroker Eagle 4340 rotating assembly I bought off a vendor in the ad section of RJ. It was very reasonable.

Initially I just wanted a 4340 4.00 crank but for the same price I could upgrade to 1/4 stroker crank, so it was a no brainer.
cepx111 is offline  
Old 01-26-2011, 01:30 PM
  #4  
SABOT7
Junior Member
APPRENTICE
 
Join Date: Mar 2007
Posts: 16
Default

How much money are you wanting to invest? That will have a big impact on what you can get. I just bought a set of the pro-comp 320 rectangular port heads bare. I had the machine shop put in a set of good severe duty valves and springs with titanium retainers good to .750 lift and got 1400 in them to the door.
SABOT7 is offline  
Old 01-26-2011, 02:10 PM
  #5  
markdunlap
Senior Member
DYNO OPERATOR
 
Join Date: Jan 2004
Location: central Illinois
Posts: 459
Default best heads

As far as the BBC aluminum Pro Comp heads, this sites ads are full of different vendors selling these and Patriot heads under different names even, some from $900 bare to $1900 CNC'd complete.

I question if they are any good at all for drag racing with roller cam springs??

They are Chinese castings with who knows what actual quality aluminum and hardness.

They appear to be a copy of the PRO ACTION/PRO TOPLINE/RHS 320 and 360 intake port size heads cast in New Zealand in a modern foundry.

They even show the exact same flow chart as the RHS heads. Coincidence or copy on this too? I question them being even close to those figures as cast.

I can see the intake port caving in with 250# seat pressure valve springs, an aggressive roller cam, and 7500 RPM.

Whats the facts on these heads other than they are $500-1000 cheaper than Dart Pro 1's, Brodix, AFR, RHS heads that are not in question as far as quality and long term investment?
markdunlap is offline  
Old 01-27-2011, 03:16 AM
  #6  
chevyfireball
Senior Member
MASTER BUILDER
 
Join Date: Dec 2005
Location: Napier, New Zealand
Posts: 230
Default

Bore it/stroke it and make yourself a 496ci.
chevyfireball is offline  
Old 01-27-2011, 04:25 PM
  #7  
superstreeter
Senior Member
SENIOR BUILDER
 
Join Date: Sep 2007
Location: Div VI
Posts: 122
Default

1st of all, before you get started with any parts, you want to purchase, first figure out how fast you want to run, then build it acordingly. you will save yourself alot of money,switching parts back and forth, the stroker 496 would be a good start, and go from there...how much horsepower do you need ?
superstreeter is offline  
Old 01-30-2011, 01:57 PM
  #8  
hotrod1994
Senior Member
EXPERT BUILDER
 
Join Date: Jul 2009
Location: nekoosa wisconsin
Posts: 308
Default

for factory heads get some rectagular port heads that were on the ls6 chevelle
hotrod1994 is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service