Can anyone help with a sbc build up

Old 01-03-2011, 01:23 PM
  #1  
robertstell
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Mar 2005
Location: Hobbsville, NC
Posts: 20
Default Can anyone help with a sbc build up

I have a 350 block, steel crank and a set of eagle rods, 5.7. I have had some bad BBC before but not really messed with SBC too much. Want to be able to put a non-lightened up S10 in the low 10s. 488 gears 550 converter. I still need to buy the rest of the stuff, heads, cam( would like to stay with a solid... mechanical) ,pistons, etc... Can you guys help me out from here...Thanks alot, Rob...
robertstell is offline  
Old 01-03-2011, 06:53 PM
  #2  
dragonmaster093
Senior Member
RACING JUNKIE
 
Join Date: Mar 2009
Location: kingsport tn
Posts: 1,735
Default

stroke it punch it .030 min order scat or eagle rotating assembly if street driven too not much over a 9:1 cr dart makes a top end kit with pro 1 heads and intake or eldelbrock has one that also includes matched cam summit part #edl-2096 460hp kit
dragonmaster093 is offline  
Old 01-03-2011, 08:45 PM
  #3  
jmarksdragster
Senior Member
RACING JUNKIE
 
jmarksdragster's Avatar
 
Join Date: Jul 2007
Location: Florida
Posts: 635
Default

Plan on a roller cam and REAL good heads and intake, and you will need to spin it a bit. I would call Chad for heads if you need to stay with 23˚ heads. Something like these.

http://1320techtalk.com/viewtopic.php?t=2053
jmarksdragster is offline  
Old 01-03-2011, 09:10 PM
  #4  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

I know of a Chevelle with an 'extreme' RPM small block in it !
A tad spendy though :shock: :shock:
TheYellaBrick is offline  
Old 01-09-2011, 04:02 AM
  #5  
rodentinfest
Junior Member
APPRENTICE
 
Join Date: Apr 2006
Location: New Haven, CT
Posts: 16
Default Re: Can anyone help with a sbc build up

Originally Posted by robertstell
I have a 350 block, steel crank and a set of eagle rods, 5.7. I have had some bad BBC before but not really messed with SBC too much. Want to be able to put a non-lightened up S10 in the low 10s. 488 gears 550 converter. I still need to buy the rest of the stuff, heads, cam( would like to stay with a solid... mechanical) ,pistons, etc... Can you guys help me out from here...Thanks alot, Rob...
I would say that is not a problem at all. I don't know about the gear choice until your tire diameter is worked out. to run low 10's, which I assume is 10.25 @ 130, with a 28" tall tire and that gear you would be going threw around 8000rpm. bad move. now if you have a 30" tall tire, you would be around 7500rpm w/con slippage factored in. a 4.56 gear at the same time would put you around 7000rpm. 410 gear would put you where you need to be with that tire and your engines ability to make decent power up to 6800 rpm the 350 is very capable of delivering the results you need with no problems. a 390b6 comp cams solid roller with decent compression and double hp heads will make a 3000lb car run 10.50's so don't sweat it. built it like you want and watch the gear and converter choices.
rodentinfest is offline  
Old 01-09-2011, 09:27 AM
  #6  
oldandtired
Senior Member
RACING JUNKIE
 
oldandtired's Avatar
 
Join Date: Dec 2008
Location: Sugar Hill, GA
Posts: 1,370
Default

290B6
oldandtired is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service