I have a 95 honda civic that we are racing asphalt with.

Old 12-25-2010, 03:24 PM
  #1  
dirttrack82
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Nov 2009
Posts: 3
Default I have a 95 honda civic that we are racing asphalt with.

we have a 95 civic with the 1.5 4 cyl. it was bored .030 the block decked and the head shaved, it has 3" exh. and open intake kinda ram air set up, it will turn 7400 rpm. at 89 mph in third gear on the 1/2 mile track. my question is , does anyone know how to get more bottom end from the car for pulling off the corners? is there anything i can do to the computer or timing to help , it has a degree able cam gear on it.
dirttrack82 is offline  
Old 12-25-2010, 09:29 PM
  #2  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default

We're mostly Detroit Iron on this forum, so don't feel put off if you don't get any knowledgeable advise. Do a search for ricer forums and you might have better luck.
TheYellaBrick is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service