4 speed trannys

Old 12-24-2010, 11:42 PM
  #1  
docrivers68
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jun 2008
Posts: 5
Default 4 speed trannys

I am trying to build . a olds school door slamer car . heavy 3500 +, ladder bars and caged i currently have a munice tranny now , but i don't want to shell , it out and cost me more , than i need to spend , i was thinking of the auto gear or the g force trannys, which one would think will take the abuse , of a high torque olds motor , some where in the area of 650+ hp , i have'nt set up the rear end , and i would like to go with the stiff wall tires , this car wont , be raced every week end be will be abused ,
docrivers68 is offline  
Old 12-25-2010, 08:14 AM
  #2  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

I don't think a muncie,even an AUTOGEAR muncie,will handle the abuse you are about to throw at it.
Tod74 is offline  
Old 12-25-2010, 08:38 AM
  #3  
mytmouz
Senior Member
RACING JUNKIE
 
mytmouz's Avatar
 
Join Date: May 2006
Location: Pelahatchie, MS
Posts: 995
Default

Might want to look at a Jerico or some along that line...
mytmouz is offline  
Old 12-25-2010, 08:48 AM
  #4  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

Originally Posted by mytmouz
Might want to look at a Jerico or some along that line...
x2
Tod74 is offline  
Old 01-19-2011, 11:06 PM
  #5  
docrivers68
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jun 2008
Posts: 5
Default

i am trying to get some infor on the g force Gf4a at this moment, any one ever had any luck with these?
docrivers68 is offline  
Old 01-20-2011, 05:01 AM
  #6  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,311
Default

Go over to classracer.com and ask a few questions from the stock and superstock guys. There is a wealth of knowledge over there.

Curtis
curtisreed is offline  
Old 01-20-2011, 02:20 PM
  #7  
gearhead1011
Senior Member
EXPERT BUILDER
 
gearhead1011's Avatar
 
Join Date: Jan 2004
Location: Shepherdsville, KY
Posts: 313
Default

You might try here.
http://www.umtrnorth.com/forums/
You have to be a logged in member to view but there's a ton of info there. I have always raced a stick car but my personal experience is limited to toploaders, nash & the Liberty I run now. There's a lot more diversity on the UMTR forum, and a lot of guys with experience with almost every manual tranny out there.
gearhead1011 is offline  
Old 01-22-2011, 06:43 PM
  #8  
docrivers68
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Jun 2008
Posts: 5
Default

thanks
docrivers68 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service