what type of transfer case does my silverado 1500 have in it

Old 12-18-2010, 08:44 AM
  #1  
ikeman
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2008
Posts: 6
Default what type of transfer case does my silverado 1500 have in it

its a 2000
ikeman is offline  
Old 12-18-2010, 08:52 AM
  #2  
johnracer
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Default

Several possibilities. Most likely a NewProcess/Venture. There should be a round metal disc bolted to the back of it with all the info.....


Johnny
johnracer is offline  
Old 12-18-2010, 09:21 AM
  #3  
ikeman
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2008
Posts: 6
Default

there is no tag onn it so im wondern which one it is
ikeman is offline  
Old 12-18-2010, 09:27 AM
  #4  
johnracer
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Default

Push button or lever?
johnracer is offline  
Old 12-18-2010, 09:57 AM
  #5  
ikeman
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2008
Posts: 6
Default

push button
ikeman is offline  
Old 12-18-2010, 10:53 AM
  #6  
johnracer
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Default

Should be a NVG-246....

Johnny
johnracer is offline  
Old 12-18-2010, 11:34 AM
  #7  
ikeman
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2008
Posts: 6
Default

ok i have one out of a 2003 1500 but the wireing isnt the same is there anyway i can make it work?
ikeman is offline  
Old 12-18-2010, 12:04 PM
  #8  
johnracer
Senior Member
DYNO OPERATOR
 
Join Date: Aug 2005
Location: Rifle Colorado
Posts: 585
Default

What's different? The connectors or ? If memory serves, the only connectors are the encoder (shift motor), a switch on top that locks in the front axle, a syncro clutch connector at the rear, and a front & rear speed sensor. Could you swap those components to the newer t/c and plug in your existing wiring? I think they all unbolt or screw out except for the syncro clutch. You might have to change the connector on that.

Hope this helps,

Johnny
johnracer is offline  
Old 12-18-2010, 12:45 PM
  #9  
ikeman
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2008
Posts: 6
Default

the one out of the 2000 has like 5 plugs on it i think and the 2003 only has three
ikeman is offline  
Old 12-18-2010, 05:53 PM
  #10  
ikeman
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Mar 2008
Posts: 6
Default

does any one knows what all year transfercases will fit my 2000 chevy 1500? thanks
ikeman is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service