Tunnel Ram w/ 2- 1050's or Single Dominator 4500

Old 11-16-2010, 07:16 AM
  #1  
campj555
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: May 2007
Posts: 2
Default Tunnel Ram w/ 2- 1050's or Single Dominator 4500

Need to ask anyone thats ran a single 4500 with a Dart intake BBC,
vs a Dart tunnel ram w/ 2- 1050 Dominators. I have both set ups already
that will go on a new 14.5 comp 565 BBC. solid roller cam 284/[email protected] .50.
3000 lb with driver, turbo 400, 456 gear, 31" tire. What are the pros vs
the cons.

Thanks Joe
campj555 is offline  
Old 11-17-2010, 03:15 AM
  #2  
chevyfireball
Senior Member
MASTER BUILDER
 
Join Date: Dec 2005
Location: Napier, New Zealand
Posts: 230
Default

I ran a 496ci with a Dart high rise and 1050 dominator. It was all good. I now run a 632ci with Dart High Rise and two 1050 Dominators that flow 1220cfm each and its REAL good! Seems to me the more gas you can get down there and burn, the better..... and then there's the two stages of nitrous....Yeehaaa.
chevyfireball is offline  
Old 11-17-2010, 07:17 AM
  #3  
TheRabbit
Senior Member
RACING JUNKIE
 
TheRabbit's Avatar
 
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,295
Default

Two carbs is a lot more air and on big motors can add from 60 even up to 80hp more than a single carb. If rules allow and you have two I'd run them. I run a single AED on my 632 with a dart intake because my rules only don't allowed dual carbs.
TheRabbit is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service