New Dart SHP Pro blocks

Old 10-11-2010, 06:12 PM
  #1  
hink
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Default New Dart SHP Pro blocks

This really looks like a nice peice for the money

This is the link
http://www.dartheads.com/products/en...ro-blocks.html
hink is offline  
Old 10-14-2010, 10:37 AM
  #2  
hink
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Default

New P/N for these blocks.

31161112 is the 4.000 bore block

31161212 is the 4.125 bore block

And their will be no one peice seal blocks availiable because they have no rear main billet cap for one peice seal crank.
hink is offline  
Old 10-20-2010, 07:35 AM
  #3  
hink
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Default

Dart just sent me a pic of the caps and bottom end view of the Pro SHP block if it fits your build contact you local Dart dealer!!!

hink is offline  
Old 11-02-2010, 10:17 AM
  #4  
hink
Senior Member
EXPERT BUILDER
Thread Starter
 
Join Date: Nov 2003
Location: NORTHEAST
Posts: 290
Default

Got my Dart order in and had a chance to look over the Pro Block and so far have been pleased with what I saw and the mains were right in the middle, cam tunnel was right at 2.120 and the lifter bores were on the low side and depending whose lifters you are running they may have to be sized. To those who have asked about the studs on the outter splayed holes they are indeed 7/16 studs. Sonic test was very good!!

NOTE we have been seeing a lot of under size roller lifters lately and anyone who is building an engine should measure all the lifters and size the lifter bores accordingly.

Any one needing a specific picture of this block let me know!!
hink is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service