> >
• >

# Watch out for StrokerLee from dayton/Trotwood Ohio

09-24-2010, 06:33 AM
#1
TKCARAUDIO
Junior Member
SHOW GUEST
Thread Starter

Join Date: May 2009
Posts: 3
Watch out for StrokerLee from dayton/Trotwood Ohio

He had a S10 listed on here for sale about a month ago....
http://www.racingjunk.com/category/3...0-4-SALE..html

advertised as a 1985 with title (I get title its a 82 by title/vin)

Says \$5500 Complete but needs drive shaft done...

We made a deal where I give my 1991 Camaro Convertable Rolling chassis for Rolling Chassis.

Heres what he was supposed to get with my car
Rolling Chassis
Exhaust Manifolds
94 Z28 Wheels
New Dash Pad
Alum gauge Bezel
Fuel Pressure Regulator
Steel hood with cowl scoop
Radiator
elect fan
Motor mounts

NO MOTOR OR TRANS

Hell I ended up giving him hedman Shorty headers and y pipe for the car also

With is I was supposed to get

Complete Truck Rolling Chassis
Motor Plates
New Headers
Nice Non Dry Rotted Tires
Drive Shaft
Tail Lights
New Sheet Metal dash
New Race Seats
New Lexan Windows
New Aluminum Steering Column
Working Gauges
Narrowed 9" (on phone told me it had 410 gears and posi)
Primered Rust Free truck
Front/Mid Motor Plate

NO MOTOR/TRANS

Well after I drive like 3 hours to meet them....

I see the trucks got TONS of BONDO in it RUST in it.
The slicks/back wheels are in back of truck(not on it for some reason)
Got some OLD beat up shorty headers on it. Some Poorly Cut/Scratched/panted lexan windows(Deff not new) A peice of aluminum thats rolded by a exhaust pipe for the dash. Junk gauges that have everything cut on rear.

No Motor Plates, Drive Shaft, or Tail Lights

I knew it was a project as mine was.

They told me that We could meet up the next day at Kilkare Drag Strip for Test and Tune. I call no answer I go to kilkare No sign of them anywhere.

He calls me next call cursing and threats to Kick my A\$\$ if I call again.

I call back because I want my shit. He gives address and says, "There are a set of tail lights/drive shaft here for you but You arent getting a F****ING motor plate from me.... I will kill you ect.. just on and on and on...

I got text messeges with his address/phone numbers.

The thing I find fishy about all of this is that the seller didn't even own the truck(They used miss communication as reason of not getting my parts) They claim to me they dont even get along.

A motor plate is like \$120

I got drive shafts and tail lights

Its not worth it to me to fight or argue over a motor plate lol

I am posting this so you can watch them

Email is
[email protected]

Cell # is 937-520-8468
home #937-276-8468

This so called 468 he offered me as a Stock bottom end 454 with cam and built heads when bought truck... No its a Built 468

http://www.racingjunk.com/category/0...or-trade-.html

owner is Joe
Number
937-835-7060
address is
244 lawn crest dayton(trotwood) ohio

Here is copy of our messages back and fourth

On [2010-08-22 17:59:02] strokerle wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > O ye there still there,i need a 4 sure day so he can get motor out.
> > > > > > > > > > > > On [2010-08-22 17:45:15] TKCARAUDIO wrote:
> > > > > > > > > > > > > Maybe tomorrow or wednesday. I have to make sure when he can do it. I just got a cash offer on car today lol but I told him I would wait and see on this truck. Motor out yet? Still gonna have drive shaft and trans crosmember mounts ect right?
> > > > > > > > > > > > >
> > > > > > > > > > > > > On [2010-08-22 17:35:48] strokerle wrote:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > what day do you want to do this?
> > > > > > > > > > > > > > On [2010-08-22 14:14:23] TKCARAUDIO wrote:
> > > > > > > > > > > > > > > Not really. I got a 8" Balancer(just stock) Steel 4 barel intake for sbc) and thats about it right now unless you need 10" slot port sub box. I cant for sure tuesday or thursday. Prolly all weekend next weekend because were supposed to be having a baby lol Mabye tomorrow
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > On [2010-08-22 14:11:26] strokerle wrote:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > ill check with him,do you have eny thing to trade 4 the mirrors and glass,slot cars r/c cars,sterio stuff,motot stuff make a offer,
> > > > > > > > > > > > > > > > On [2010-08-22 14:05:52] TKCARAUDIO wrote:
> > > > > > > > > > > > > > > > > When do you want to do this?
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > On [2010-08-22 13:07:09] strokerle wrote:
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > the windows and mirrors are mine,not his,
> > > > > > > > > > > > > > > > > > On [2010-08-22 13:01:46] TKCARAUDIO wrote:
> > > > > > > > > > > > > > > > > > > The Z wheels do but the eagles only have 1 tire. So if you throw in the windows/mirror Ill give him the eagles alloys and some used tires
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > When was you guys wanting to come up?
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > On [2010-08-22 12:58:17] strokerle wrote:
> > > > > > > > > > > > > > > > > > > > sounds good,the wheel's have tires right.
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > On [2010-08-22 12:50:40] TKCARAUDIO wrote:
> > > > > > > > > > > > > > > > > > > > > yes its cut in the hood(My carb/aircleaner wouldnt clear)
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > The car does have a rust hole the size of 1/4 in the left rear wheel well I just noticed the other day. rear bumper(under bumper cover has rust in it)
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > On [2010-08-22 12:48:55] strokerle wrote:
> > > > > > > > > > > > > > > > > > > > > > is the hole in the cowl to?
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > On [2010-08-22 12:36:43] TKCARAUDIO wrote:
> > > > > > > > > > > > > > > > > > > > > > > Only thing listed is new dash pad and billet gauge bezel besides motor. The 5 speed stuff is still in car but If im not giving you the 5 speed I am keeping the shifter and the shifter plate(Ill put a auto shift plate in with car.
> > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > Ill give the cowl hood off the gray black car its just a scoop molded to stockhood cut out for air cleaner radiator Elect Fan I got stock manifolds but might have headers at my dads garage(i know he has a set i have to deal him out of them)
> > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > On [2010-08-22 12:24:35] strokerle wrote:
> > > > > > > > > > > > > > > > > > > > > > > > the windows are mine that it 40.00 or trade,we dont want a 305 keep it,
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > On [2010-08-22 12:22:02] TKCARAUDIO wrote:
> > > > > > > > > > > > > > > > > > > > > > > > > Well I am not giving the motor in the add if your keeping your motor/trans. I cant afford to do that. Also the wheels I have to see if the guy that tows will take something else for towing them instead of wheels. Ill give you the eagle alloy wheels if you come to me.(only another 30 mins I have to pay him for the tow and Dont have the extra cash. also id like to have windows but Im not giving extra for them. lol I dont have the cash
> > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > On [2010-08-22 12:13:50] strokerle wrote:
> > > > > > > > > > > > > > > > > > > > > > > > > > we want the camaro,our m/t,cowl hood,and wheel's and tire's,you meat 1/2 way,all the stuff in the ad to,windows are mine you want them ill sale to you 40.00, and i have a set s-10 mirrors 4 20.00 ,vin is in there,
> > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > On [2010-08-22 10:01:28] TKCARAUDIO wrote:
> > > > > > > > > > > > > > > > > > > > > > > > > > > So your saying no motor/trans cowl hood and junk roller wheels on camaro and meet you half way?
> > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > I found a set of eagle alloy wheels in my lil brothers garage sorta like ones in pic but no center caps or tires I could give if you leave electric water pump
> > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > What kind of radiator/fan is in the truck? I mean is everything else there to install motor/trans besides motor/trans?
> > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > On [2010-08-22 00:38:43] strokerle wrote:
> > > > > > > > > > > > > > > > > > > > > > > > > > > > he has no trailer,we will do that trade but u meat us 1/2 way,
> > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > On [2010-08-21 17:00:42] TKCARAUDIO wrote:
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > Ill give you the convertable car no motor no trans you keep your motor/trans Ill give you the 94 Z28 wheels(or possibly a diff set if I find a set) Cowl hood off gray car and you come here.
> > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > I dont have a way to tow or a trailer.
> > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > If I find a way to tow them Ill have to put junk roller wheels. Because the guy that said he will tow them wants the wheels to do so
> > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > On [2010-08-21 14:25:24] strokerle wrote:
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ok you keep your wheels ill keep my wheel's we meat 1/2 way,
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On [2010-08-21 12:10:18] TKCARAUDIO wrote:
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I can see the 5500 price like it sits but when you pull motor/trans/converter the truck is worth what?
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Im not trying to be hard to deal with but For roller he wants alot no offense to you or him. I will give my new 350/5speed and a clutch intake carb ect. and trade him the way it sits
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Id like to see a few better pictures of the truck as it is now
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Does it have master cylinder on it(I noticed in your pics it didnt)
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Alum Dash All that will come out Lexan Windows will come out racing seats will come out Thats all stuff I wont be using if I get the truck.
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I know you have a truck and trailer as I cant tow with my truck trans is acting up. Plus Im off work since my wife is 9 months pregnant and due to have our son any day now. Its hard for me to get out there to pick up a car with her at home already dialated to 3 CM.
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On [2010-08-21 12:01:44] strokerle wrote:
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > this truck is tubed, NEW 14 pt cage, NEW alum dash, NEW alum body bushings, NEW alum steering colm,9' ford,14x32 rear slicks,super trick wheel's,fuel cell 1/2 fuel line mallory fuel pump, NEW marprof lexan windows, NEW switch panel, NEW 2 racing seats, used seat covers,q-stick shifter, new front & new rear motor plates, new headers,355 sbc,350 turbo tranny, 4200 stall,rear roll pan,no rust,and its not 4500-its 5500.with a title,
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On [2010-08-21 11:26:43] TKCARAUDIO wrote:
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Well it wont have a cowl hood. I dont have one. And Im sorry but your asking \$4500 for it turn key not rolling Rolling its not worth but about what mine is advertised for. Im not trying to be hard to deal with but you guys are asking for alot
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I can see getting the wheels on it(which I was going to see what we have for the car) Cowl hood I dont have and neither does yours
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Keep his motor and trans ok but roller for roller
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > But if hes keeping his motor and trans hes not getting the stock 305
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > and Tow both aint going to happen as My trans in my truck is messed up.
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (Says in add I cant transport cars)
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Ill counter offer to you guys but
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I will give my camaro a set of 16" Alum wheels The new 350/5speed I have and a intake and 650 holley for the truck the way it sits....
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I mean I am going to have Run brake Lines Hook up rear brakes get drive shaft fixed and Hope it goes down the road straight.(I know it was professionally done and what not but I have saw some professional tubed cars go down road crooked) and Ill give the hood with cowl scoop molded in steel hood thats on my gray car(But I wont give this hood up with the other deal since I am using it)
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On [2010-08-21 01:16:12] strokerle wrote:
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > the car needs nice wheels,cowl hood,keeping his motor&tranny,all the stuff in the ad & you tow both,
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On [2010-08-20 22:21:34] TKCARAUDIO wrote:
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Pick a car in this add and well make a deal
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Ad #1973087
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 614 364 9995
> > > > > > > > > > > > > > > > > > > > > > > > > >
09-24-2010, 06:35 AM
#2
TKCARAUDIO
Junior Member
SHOW GUEST
Thread Starter

Join Date: May 2009
Posts: 3

i know it might not be 100% right to put his address on here but Hey maybe if somone sees it they wont do a deal with him when he gets the address
09-24-2010, 01:21 PM
#3
Scooterz
Senior Member
RACING JUNKIE

Join Date: Mar 2006
Location: EUGENE,OR.
Posts: 3,408

Why did the guy starting cussing at you? It sounds like you guys had an agreement, and all the sudden they flipped out & made death threats? What part of the story is missing?
09-24-2010, 08:10 PM
#4
TKCARAUDIO
Junior Member
SHOW GUEST
Thread Starter

Join Date: May 2009
Posts: 3

Originally Posted by Rigsby
Why did the guy starting cussing at you? It sounds like you guys had an agreement, and all the sudden they flipped out & made death threats? What part of the story is missing?
I called after 2 weeks. I state i would like my parts as my motor/trans are ready to go in....

he states Im not getting the motor plates because he needed it and blah blah.

when i asked again i got threats...

they are just low down dirty thiefs
09-25-2010, 08:25 AM
#5
contagious
Senior Member
MASTER BUILDER

Join Date: Nov 2005
Location: Mobile,Al.
Posts: 127
SCAMMER

That was painful to read. !!!

There are gobber lip troll's out there every were,don't buy from internet unless it's a small dollar item that won't hurt to bad if you get screwed.
Crying shame a few trolls make like that.!!!!!

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Thread Tools
Display Modes
Linear Mode