Which intake?

Old 09-01-2010, 09:56 AM
  #1  
cepx111
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: May 2006
Posts: 2,044
Default Which intake?

Heres the low down:

496 BBC 13-1, 722/722 lunati solid roller, Merlin Grumpy Jenkins cast iron heads, 1050 dominator, 5500 8 inch converter, 1.76 glide, 538 gear, 31x10.5W slicks in a back-halved 71 nova.

Current intake is a Wiend Team G but he's looking to get a different one.

Recommendations please.

Thx> Cp
cepx111 is offline  
Old 09-01-2010, 12:02 PM
  #2  
bbchevy
Senior Member
RACING JUNKIE
 
Join Date: Mar 2003
Location: Fountain,MICHIGAN
Posts: 856
Default Re: Which intake?

Originally Posted by cepx111
Heres the low down:

496 BBC 13-1, 722/722 lunati solid roller, Merlin Grumpy Jenkins cast iron heads, 1050 dominator, 5500 8 inch converter, 1.76 glide, 538 gear, 31x10.5W slicks in a back-halved 71 nova.

Current intake is a Wiend Team G but he's looking to get a different one.

Recommendations please.

Thx> Cp
------------WHY------------?
I Took My R&M Team G Off and Installed a 454R Edelbrock.I ONLY LOST a FULL TENTH.Although My Team-G is NOT a Stock Manifold,it is a Team-G!
I have Probably 3 of the Best out there,Team-G PORTED,DART,and Lastly a 454R Edelbrock,all have 4500 Flange.
The T/G CLEARLY Out Preforms the 454R and is allmost a Toss-Up with the Dart.
Both the T/G and the Dart are F/Sale and I would OFFER You the Same deal as before!
As far as the Edelbrock its Going with the Car so is Not avalible?
LATER
G 8)
bbchevy is offline  
Old 09-01-2010, 12:19 PM
  #3  
cepx111
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: May 2006
Posts: 2,044
Default

Thank again G, I will tell him about your offer.

I drive this car for him quite a bit and it runs good for a fairly heavy car but he swears the intake is holding him back so he wants to change to something, do you think the ported dart would help him?

His Team G is an older one and is unported, but comparred with his heads, huge difference, intake ports are way smaller than the head.

PM sent
cepx111 is offline  
Old 09-01-2010, 01:29 PM
  #4  
TheRabbit
Senior Member
RACING JUNKIE
 
TheRabbit's Avatar
 
Join Date: Jan 2007
Location: Augusta, Ga.
Posts: 2,295
Default

I had an old Team G and swapped it for a Profiller. Can't say what difference it made because I rebuilt the motor from a 509 to a 548, but the motor made 868hp with world products heads flowing 399cfm.
I always liked the Profiller intake. It is taller than the team G.
TheRabbit is offline  
Old 09-03-2010, 03:51 AM
  #5  
cepx111
Senior Member
RACING JUNKIE
Thread Starter
 
Join Date: May 2006
Posts: 2,044
Default

Thanks for chimming in you two, over 50 views and 2 replies, hmmm.

This thread is Yellowbullet bound!
cepx111 is offline  
Old 09-07-2010, 04:36 AM
  #6  
chevyfireball
Senior Member
MASTER BUILDER
 
Join Date: Dec 2005
Location: Napier, New Zealand
Posts: 230
Default

I had a Dart High Rise on my 496, with 1050 dominator and 1 inch spacer. It performed really well.
chevyfireball is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service