Practice Tree Simulator

Old 08-15-2010, 01:25 PM
  #1  
instagators84
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Feb 2009
Posts: 14
Default Practice Tree Simulator

I am trying to find a practice tree simulator, I have a dragster and if you have seen these before you know what I am talking about. They are built kinda like the cock-pit of a dragster with uper and lower frame rails, seat, and a steering wheel. I have found something like it on QuarterMax .com but is not what I am wanting. Any help would be greatly appreciated.
Thanks.
instagators84 is offline  
Old 08-15-2010, 02:30 PM
  #2  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

maybe get a full size practice tree and make your own? I never heard of what you are looking for but it sounds cool...and expensive.
Tod74 is offline  
Old 08-15-2010, 02:44 PM
  #3  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

About 10 yrs. ago i bought a protree, (full size) it came with controls where you could actually sit in your own car and use the controls from your car it was about $800.00 then maybe less now. But as Todd says you can build your own, below is a website that has everything needed to build your own (cheap) or you can buy one completed to your specs. (not cheap)

Zip.

http://www.myhomesimulator.com/?gcli...FQ5vswodShXGYw
zipper06 is offline  
Old 08-15-2010, 02:46 PM
  #4  
fla1976
Senior Member
RACING JUNKIE
 
fla1976's Avatar
 
Join Date: Aug 2007
Posts: 1,534
Default

http://www.portatree.com/index.php?a...rkz115944kl4n1

http://www.crawsracing.com/store/index.php?cPath=53

These are the only sites I could find.
fla1976 is offline  
Old 08-15-2010, 03:45 PM
  #5  
instagators84
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Feb 2009
Posts: 14
Default

Yea I found those too, but those are not exactly what I was looking for. I was wanting to find the one built to simulat the dragster, but thanks for the help guys. I was maybe thinking of making one out of PVC for the upper and lower frame rails, then just making holes for my bracing which could be something like some cheap muffler pipe or just some average cheap pipe itself to make it solid enough to sit in.
Thanks.
instagators84 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service