anybody deal with jay71demon?

Old 08-14-2010, 01:30 PM
  #1  
cox440
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Aug 2010
Posts: 4
Default anybody deal with jay71demon?

My first purchase on racing junk and recieved bad parts.purchased a cam and lifters.called and talked to him on phone ,he said they good,sent postal money order ,recieved parts,open box and cam contanier,lobes are junk ,lifters must not have been turning,tried to call,left meesages,no response,finally sent email back to me saying ,must have been me,sorry , so be aware my pocket book is
cox440 is offline  
Old 08-14-2010, 02:12 PM
  #2  
my9secskylark
Senior Member
MASTER BUILDER
 
Join Date: May 2004
Location: youngstown,ohio
Posts: 131
Default info

I will be the first on this one. First off please provide more info. Ad number would be helpful. There are a lot of people on here who will help you above and beyond but can't do everything. The more info you provide the better.
my9secskylark is offline  
Old 08-14-2010, 04:33 PM
  #3  
cox440
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Aug 2010
Posts: 4
Default

the ad #1925313,was a solid flat tappet cam and lifters,i even sent extra to cover shipping and handling
cox440 is offline  
Old 08-14-2010, 05:39 PM
  #4  
my9secskylark
Senior Member
MASTER BUILDER
 
Join Date: May 2004
Location: youngstown,ohio
Posts: 131
Default info

Just messaged him and let him know about this post so we will see if he comes on to give his side.[/b]
my9secskylark is offline  
Old 08-14-2010, 06:38 PM
  #5  
Tod74
Senior Member
RACING JUNKIE
 
Join Date: Sep 2007
Posts: 4,143
Default

I wouldn't buy a used flat tappet cam unless I knew the guy really well and took it out myself and had it in my possesion the whole time...to know the lifters were kept on the correct lobe....but even then I would probably not buy a used flat tappet. I hope you get uit settled.
Tod74 is offline  
Old 08-14-2010, 10:35 PM
  #6  
bigray
Senior Member
DYNO OPERATOR
 
Join Date: Jul 2003
Location: Chelsea Oklahoma
Posts: 558
Default

Heck cams are getting so cheap.. why would you buy a used one ?? we just bought a billet roller cam from Herbert for like 225.00 to the door,,i really think it was cheeper than that, or a flat tappet, hech a Howards cams are only 75.00 or soo..
bigray is offline  
Old 08-16-2010, 10:42 AM
  #7  
cox440
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Aug 2010
Posts: 4
Default

I totally understand what you guys are saying,but that was not the point ,I paid good american money and did not recieve what was represented.I just wanted to state how well this transaction went(cavier emtur),I have solld parts before and if it not was i claimed ,i alwalys refunded their money.
cox440 is offline  
Old 08-16-2010, 04:08 PM
  #8  
Scooterz
Senior Member
RACING JUNKIE
 
Join Date: Mar 2006
Location: EUGENE,OR.
Posts: 3,408
Default

Originally Posted by cox440
I totally understand what you guys are saying,but that was not the point ,I paid good american money and did not recieve what was represented.I just wanted to state how well this transaction went(cavier emtur),I have solld parts before and if it not was i claimed ,i alwalys refunded their money.
I understand. It is not how much or what the parts are. It is about getting what you thought you would get; based on what you were told. I am sorry about the deal. I think everyone is just saying it would be easier to go new on them. Again, I agree that you should be able to score a good deal no matter what the product is... because it was represented correctly in the first place.
Scooterz is offline  
Old 08-17-2010, 10:36 AM
  #9  
ghustler
Senior Member
MASTER BUILDER
 
Join Date: Dec 2006
Posts: 143
Default

If you would have bought new from Summit or Jegs you you not have a any problems now.
ghustler is offline  
Old 08-17-2010, 11:42 AM
  #10  
curtisreed
Senior Member
RACING JUNKIE
 
curtisreed's Avatar
 
Join Date: Feb 2004
Location: KIEFER, OK.
Posts: 1,311
Default

Cox,
I may be in the minority here, but to me it doesn't matter a hill of beans that you didn't buy from Summit, Jeg's, etc...... The parts you paid for should have been good. END OF STORY. You deserve what you paid for.

Curtis
curtisreed is offline  

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service