318 la v8 convert efi to carb

Old 05-16-2010, 12:42 PM
  #1  
hauln18whelstyle
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: Sep 2007
Posts: 6
Default 318 la v8 convert efi to carb

How hard would it be to convert a 318 v8 LA engine from EFI to Carb??
hauln18whelstyle is offline  
Old 05-16-2010, 01:47 PM
  #2  
burnskustomz
Senior Member
DYNO OPERATOR
 
Join Date: Mar 2009
Location: Booneville,Ms
Posts: 505
Default

i would think you would just take out all the electronic computer stuff and take what then would be a long block and put an intake and carb on it
1. take unhook all electronics and trash it unless u want to resale
2. take the intake and throttle body off along with fuel injectors and fuel rail
3. buy a intake and carb that is California emissions legal and wala u then have a carbed engine also u might need to replace the dist. but im not sure with the fuel injected stuff.

Thats what i'd do but then again i dont follow Emissions Laws either that craps a way for the Government to line their wallets.
burnskustomz is offline  
Old 05-17-2010, 06:33 PM
  #3  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,579
Default

Not hard at all, I just done this for a friend on a 91 Dodge pickup, First you need to get a good fuel pressure regulator, EFI run's off [throttle body type] 18 psi, injector type run's off 45 psi, remove intake and throttle body, install new intake and carb, run line from regulator to carb set fuel pressure to 7 psi, fire engine and start driving, throttle cable same from one to other.
mopar1968 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service