What brand pistons do I have

Old 04-10-2010, 08:31 PM
  #1  
HigginsRacing
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: May 2006
Posts: 4
Default What brand pistons do I have

I need to replace one piston in a motor but can't figure out what brand they are. The only thing on them is DRE 21 with a letter A below the dre 21. Any help would be great.
HigginsRacing is offline  
Old 04-11-2010, 05:28 AM
  #2  
ajk
Senior Member
DYNO OPERATOR
 
Join Date: Jun 2009
Location: Wi
Posts: 522
Default

Been trying to figure this out. I think DRE stands for "Dont really exsist" LOL What are these pistons out of?This may narrow down the search...
ajk is offline  
Old 04-11-2010, 06:49 AM
  #3  
signsbyesa
Senior Member
RACING JUNKIE
 
Join Date: Feb 2004
Location: san antonio, texas
Posts: 1,233
Default

i found this ad in ebay-

I have for sale a set of 8 DRE 22 TRW Dome pistons. They are .927 pin diameter. There are no pins with these pistons. 4.125 bore, skirts actually measure 4.115 which is clearanced .010. These have a deck heighth of 1.250. Also the this is a .200 dome. These are for 18 degree heads but will work in 23 degree bue will lower compression slightly. These are very lightly run and all 8 are in great condition. Rings are 1/16, 1/16, 3/16. These are for a 400 block standard bore with 350 crank and 6 inch rod or a 400 block and 400 crank with 5.850 rods. Shipping will be $30. These are used and sold AS IS. Please e-mail with any questions and please check out
signsbyesa is offline  
Old 04-11-2010, 07:17 AM
  #4  
fla1976
Senior Member
RACING JUNKIE
 
fla1976's Avatar
 
Join Date: Aug 2007
Posts: 1,533
Default

Here is a website for DRE, but I didn't see anything about pistons.




http://www.dreracing.com/
fla1976 is offline  
Old 04-15-2010, 06:57 AM
  #5  
HigginsRacing
Junior Member
SHOW GUEST
Thread Starter
 
Join Date: May 2006
Posts: 4
Default

They are for a 18 degree 434
HigginsRacing is offline  
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service