roll cage question

Old 04-09-2010, 11:11 PM
  #1  
chevysteve2
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Oct 2007
Posts: 24
Default roll cage question

I am putting in a jester 10 point cage in my wifes nova. the seatbelt bar and the two (short) down riggers that attach the front suspension mount to to the seatbelt bar and main hoop, are 1 1/4 inch. the main hoop and all the other bars are 1 5/8. I called jegs and they said the bars are legal for competition. Just want to make sure before I weld them in place. because the cage in my car has all the same diameter bars.
chevysteve2 is offline  
Old 04-10-2010, 09:19 AM
  #2  
cam67152
Senior Member
MASTER BUILDER
 
Join Date: Apr 2009
Location: B.C. Canada
Posts: 145
Default

Yes 1 1/4" is all that is required for those bars, min. thickness must be .065" CM or .118 MS.

Good luck with the install

cam67152
cam67152 is offline  
Old 04-10-2010, 09:29 AM
  #3  
chevysteve2
Junior Member
APPRENTICE
Thread Starter
 
Join Date: Oct 2007
Posts: 24
Default

thanks for the quick response, I will weld it in
chevysteve2 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service