Dodge 9 1/4 rear end??? will it fit

Old 04-03-2010, 09:09 AM
  #1  
burnskustomz
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Mar 2009
Location: Booneville,Ms
Posts: 505
Default Dodge 9 1/4 rear end??? will it fit

Last night at the dragstrip I came up on a 9 1/4 Dodge truck rearend and was wondering if it would fit under a 1985 camaro and if so what modifications will need to be done. Thank you :?: :?: :?: :?:
burnskustomz is offline  
Old 04-03-2010, 04:26 PM
  #2  
zipper06
Senior Member
RACING JUNKIE
 
Join Date: Jan 2006
Location: La.
Posts: 2,890
Default

You can make anything fit, but that would be total overkill. By the time you had it narrowed, new axles, etc. you would have spent possible a $1,000.00. The bigger/heaver you go the more HP it take to spin the rearend. Why don't you just look for 12 bolt chevy or a 9" ford out of an early mustang or mercury. It's close to the right width and 1/2 the weight.

JMO

Zip.
zipper06 is offline  
Old 04-03-2010, 07:16 PM
  #3  
burnskustomz
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Mar 2009
Location: Booneville,Ms
Posts: 505
Default

i ran up on a deal and i'm only 15 have a fairly good job for my age but i'm still paying for the car so im building a low budget build and im a redneck and dont care what it looks like i'll leave them tires hanging out the side but thnx for tha advice but im and i dont care bout speed just consistancy but anyways thanx for tha advice
burnskustomz is offline  
Old 04-07-2010, 08:00 AM
  #4  
TheYellaBrick
Senior Member
RACING JUNKIE
 
TheYellaBrick's Avatar
 
Join Date: Mar 2008
Location: Emmett, Idaho
Posts: 7,334
Default


Then WHY ask for advise if you're just gonna 'do it your way' ?????????????
TheYellaBrick is offline  
Old 04-08-2010, 12:54 PM
  #5  
burnskustomz
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Mar 2009
Location: Booneville,Ms
Posts: 505
Default

i didn't no if it waz gonna fit and i think i'm gonna sale it now!! so if you know anybody close by MS needing 1 tell em i got 1 4 sale
burnskustomz is offline  
Old 04-12-2010, 05:06 AM
  #6  
THERATTLER
Senior Member
RACING JUNKIE
 
THERATTLER's Avatar
 
Join Date: Sep 2003
Location: LICKSKILLET , MISSISSIPPI
Posts: 1,474
Default

littlestick is always looking for a little rearend
THERATTLER is offline  
Old 04-12-2010, 06:22 PM
  #7  
mopar1968
Senior Member
RACING JUNKIE
 
mopar1968's Avatar
 
Join Date: Dec 2006
Location: Abingdon,Virginia
Posts: 3,579
Default

I would use a 8 3/4 before i would use a 9 1/4, Just my own opinion !!! Mark.



''JUST MY TWO CENT'S WORTH''
mopar1968 is offline  
Old 04-12-2010, 06:30 PM
  #8  
burnskustomz
Senior Member
DYNO OPERATOR
Thread Starter
 
Join Date: Mar 2009
Location: Booneville,Ms
Posts: 505
Default

yea i know where tons of them are at in my friends junkyard but i found this one at a fair price and figured i could make some money on it or find something to put it in
burnskustomz is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service