poor idle

Old 03-22-2010, 05:50 PM
  #1  
cam67152
Senior Member
MASTER BUILDER
Thread Starter
 
Join Date: Apr 2009
Location: B.C. Canada
Posts: 145
Default poor idle

A friend of mine just received his new motor 440 mopar edelbrock performer heads, 11:1 comp, not sure on cam specs but I no its the largest solid flat tappet that mopar performance makes, single plane intake with a 1050 dominator.
The problem is we cant seem to get a decent idle, seems like a lean backfire but burn your eyes out its so rich.
It clears up nice after mid range right up to max rpm.
on the way back down it takes a long time to get to idle, then stumbles and stalls, if you try to give it throttle it backfires!

we changed to a 850 with a little improvement but not much!
it also takes along time to get to temp.

I'm thinking cam timing? or vacuum leak?

Thanks Kirk

I KNOW............ ITS A MOPAR :? :roll: :? :roll: :? :roll: :?
cam67152 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service